|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
07-13-2017, 07:14 PM | #1 |
Not Yet Wild
Join Date: Jul 2017
Posts: 3
|
2013 Club Car wanting to do the PQ Assassin motor need advice
I have a 2013 Club Car Precedent SN PH1338-400856 with the stock 18x8.5-8 tires. I want to do the PQ assassin motor swap with the additional required components, but I can't seem to get ahold of anyone a PQ for some answers. I have left two messages and an email, but haven't heard anything back. I'm sure they are busy so I though maybe I could get some of my questions answered here so when I do get ahold of them I don't take up too much of their time.
I am new to carts so forgive me if I am asking noobe questions. I am targeting 40 mph with as much of the sleeper look as possible. I think I will need the assassin motor, new controller, upgraded cables, and solenoid. Do I also need the heavy duty F&R switch and pot box (what does the pot box do?) From reading it sound like I really need to consider upgraded brakes if getting to these speeds any recommendations? Will my 6-8V batteries work for the motor or will I need to increase my voltage? Can you have a controller to tune down the cart when my wife drives it with this setup? |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-13-2017, 07:15 PM | #2 |
Not Yet Wild
Join Date: Jul 2017
Posts: 3
|
Re: 2013 Club Car wanting to do the PQ Assassin motor need advice
Also forgot to ask about gearing? Will a gear change or tire change be required or both?
|
07-13-2017, 07:18 PM | #3 |
Not Yet Wild
Join Date: Jul 2017
Posts: 3
|
Re: 2013 Club Car wanting to do the PQ Assassin motor need advice
Here is what is in my cart for batteries. Not sure if these are stock. I couldn't find a date code on them.
|
07-13-2017, 07:25 PM | #4 |
Gone Wild
Join Date: Sep 2015
Location: Cincinnati, Ohio
Posts: 1,354
|
Re: 2013 Club Car wanting to do the PQ Assassin motor need advice
Well if you are looking to go 40mph, you may want to add front brakes to your list.
Really getting upwards of 30 mph should have everyone looking at front brakes. Also, you have a sepex cart so it is separately excited and the FnR switch doesn't need to be heavy duty. (it's just a rocker switch with 16 gauge wires on it *maybe 12 gauge) The "pot" you are talking about is an MCOR on the sepex carts and that will not need to be changed out either. Those batteries probably are original batteries/ The Powerdrive batteries are what CC puts in at the factory. There are white stickers on the batteries, probably have bar codes and should have a letter and number. The letter would be the month and the number would be the year. So, for instance, a B3 would be February 2013 batteries. |
07-13-2017, 07:27 PM | #5 | |
Gone Wild
Join Date: Jan 2017
Location: Queensland Australia
Posts: 1,332
|
Re: 2013 Club Car wanting to do the PQ Assassin motor need advice
Quote:
The batteries will do all this or you can go the whole hog and switch to Lithium. There are plenty of threads on doing that. |
|
07-13-2017, 07:31 PM | #6 |
Gone Wild
Join Date: Apr 2015
Location: NorCal
Posts: 718
|
Re: 2013 Club Car wanting to do the PQ Assassin motor need advice
Precedent? PH is Excel cart, I think so no FNR switch needed. That kind of speed will need lots of power and 8:1 gears or 23" tires. The Alltrax XCT500 also has the personality switch that can make it strong enough for a man but mild enough for a woman. 2AWG cables and SHD solenoid are also a must.
Those batteries likely won't last long. Consider Lithium. Not only can it provide the massive amps you'll need, it will save you 300 pounds! |
07-13-2017, 07:52 PM | #7 |
Gone Wild
Join Date: Jan 2017
Location: Queensland Australia
Posts: 1,332
|
Re: 2013 Club Car wanting to do the PQ Assassin motor need advice
|
07-13-2017, 07:53 PM | #8 |
Gone Wild
Join Date: Apr 2015
Location: NorCal
Posts: 718
|
Re: 2013 Club Car wanting to do the PQ Assassin motor need advice
|
07-18-2017, 06:17 PM | #9 |
Not Yet Wild
Join Date: Jun 2013
Location: Fort Mill SC
Posts: 36
|
Re: 2013 Club Car wanting to do the PQ Assassin motor need advice
Robbie told me the Assassin was for Series carts so I needed the Executioner...I have a 2010 CC precedent. Alltrax has a multiuser switch called the FNKS which will allows different settings
Sent from my iPhone using Tapatalk |
|
|
Similar Threads | ||||
Thread | Forum | |||
wanting to put 420cc motor in 72 cushman | Restoration | |||
Wanting advice | Golf Carts and Parts | |||
PQ Assassin on 96 club ds stock tires | Extreme DC! | |||
1994 Marathon rebuild - Wanting some opinions/advice | Electric EZGO | |||
35 HP motor in a 93 Club Car..need some advice | Gas Club Car |