1995 Club Car DS runs for 5 minutes and then stalls...

[GA_bbco]

Follow up. I ordered a new coil and replaced. Seems to be working great now. I had the cart running at 14mph and I left the rev limiter off and go 18 mph. Seems ok to leave off. Also, didn’t remove the terrible bolt on the back of the fly wheel cover when changing coil. I was able to pull it back after removing the others and get a socket in to change coil. That saved me a lot of time and never had to remove body. I have a pic if interested. Thank you for all the help!!

[meimk]

Club Car did away with that back bolt in the shroud on later models. It must not have caused enough owners to give up and take it to the dealer. If I have one of those earlier FE290’s out for any reason I like to “lose” that one bolt - just to make things easier later. Glad to hear you got it fixed.

[lockman1]

Originally Posted by meimk

Club Car did away with that back bolt in the shroud on later models....

I wish!

My 07 still has it, it was a bear getting to it when I put in my timing advance key,
Knowing I might have to take the shroud off again,
I used a hole saw and popped a hole in the cradle mount for future access...

009 (2).JPG

010 (2).JPG

[CWDunwoodie43]

Originally Posted by lockman1

I wish!



My 07 still has it, it was a bear getting to it when I put in my timing advance key,

Knowing I might have to take the shroud off again,

I used a hole saw and popped a hole in the cradle mount for future access...



Attachment 170991



Attachment 170992

Any pics or video on how too do the coil on my 2008 Club Car Precedent? Thanks! [emoji1303][emoji1306]


Sent from my iPhone using Tapatalk Pro