Anybody used this lift kit ??

TexTurbo · 01-12-2020, 06:36 PM

Seeking a little input,,,

This lift kit (site sponsor E Cart Parts)

https://www.ecartparts.com/allsports...it-made-in-usa

I have used other AllSports lifts and found them very good quality, just not this particular one....
The reason I'm leaning to this one is the fact that it comes with new spindles etc, and mine and the kingpins are pretty sloppy...

Any input either way is welcome and appreciated !

Thanks !
Stan

kgsc · 01-13-2020, 07:59 AM

Only thing I see I don’t like is it looks like the tie rod that goes between spindles is under the axle and low. I can see that getting bent quickly.

IRwynn · 01-14-2020, 11:19 AM

Just installed this lift, I like that it came with new spindles. On the rear the it uses longer leaf spring plates. So far I like it. Will measure the height of the tie rod whine I get home .

TexTurbo · 01-14-2020, 05:23 PM

Thanks to you both for the input !!

Im gonna try it !!!!

Can always count on the folks here for guidance !!

zingerbateman · 01-14-2020, 07:43 PM

Quote:

Originally Posted by kgsc

Only thing I see I don’t like is it looks like the tie rod that goes between spindles is under the axle and low. I can see that getting bent quickly.

They install on the top so they are tucked behind the axle. I just installed same lift and I did have to lengthen them.

IRwynn · 01-15-2020, 04:28 PM

Measured the tie rod height and it is 12 inches above ground and sits a few inches below the drop axel

IRwynn · 01-16-2020, 10:51 AM

Picture of the tie rod

TexTurbo · 01-16-2020, 10:54 AM

Thanks guys !!!!

I appreciate your input and efforts !!!

01-12-2020, 06:36 PM	#1
TexTurbo Gone Wild Join Date: Feb 2017 Location: Liberty Hill, Texas Posts: 472	Anybody used this lift kit ?? Seeking a little input,,, This lift kit (site sponsor E Cart Parts) https://www.ecartparts.com/allsports...it-made-in-usa I have used other AllSports lifts and found them very good quality, just not this particular one.... The reason I'm leaning to this one is the fact that it comes with new spindles etc, and mine and the kingpins are pretty sloppy... Any input either way is welcome and appreciated ! Thanks ! Stan

01-13-2020, 07:59 AM	#2
kgsc Gone Wild Join Date: Dec 2009 Location: Aiken, SC Posts: 13,174	Re: Anybody used this lift kit ?? Only thing I see I don’t like is it looks like the tie rod that goes between spindles is under the axle and low. I can see that getting bent quickly.

01-14-2020, 11:19 AM	#3
IRwynn Not Yet Wild Join Date: Apr 2019 Location: Statesboro, Ga Posts: 49	Re: Anybody used this lift kit ?? Just installed this lift, I like that it came with new spindles. On the rear the it uses longer leaf spring plates. So far I like it. Will measure the height of the tie rod whine I get home .

01-14-2020, 05:23 PM	#4
TexTurbo Gone Wild Join Date: Feb 2017 Location: Liberty Hill, Texas Posts: 472	Re: Anybody used this lift kit ?? Thanks to you both for the input !! Im gonna try it !!!! Can always count on the folks here for guidance !!

01-15-2020, 04:28 PM	#6
IRwynn Not Yet Wild Join Date: Apr 2019 Location: Statesboro, Ga Posts: 49	Re: Anybody used this lift kit ?? Measured the tie rod height and it is 12 inches above ground and sits a few inches below the drop axel

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

01-16-2020, 10:54 AM	#8
TexTurbo Gone Wild Join Date: Feb 2017 Location: Liberty Hill, Texas Posts: 472	Re: Anybody used this lift kit ?? Thanks guys !!!! I appreciate your input and efforts !!!

Similar Threads
Thread	Forum
RHOX LIFT-100 6" Lift Drop Spindle Steering Stabilizer?	Lifted Golf Carts
Marathon Lift questions....Econ lift vs Jake 4"	Lifted Golf Carts
Spindle lift with Z lift - How to lift rear??	Lifted Golf Carts
Axle lift vs. Spindle lift- Pros and Cons	Lifted Golf Carts
Axle lift vs. Spindle lift- Pros and Cons	Electric EZGO