|
09-26-2009, 12:14 PM
|
#1 |
|
Gone Wild
 Join Date: Sep 2009
Location: DOVER,DE
Posts: 533
|
96 CC 48v no go
Cart will not go on ground,wheels in the air will run slowly in both foward and reverse.Batts are up all connections are clean and good at this point am suspect of pot or controller.This started as an interminent problem and now will not recover.Can't seem to find good troubleshooting info.From the time I got the cart the micro sw on the pot was locked closed and the solenoid would close as soon as key went on,didn't see that as a problem,replaced it anyway now works normal.Any guidance or test procedure for pot and controller would be big help,thanks in advance.Dave
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
09-26-2009, 03:00 PM
|
#2 |
|
Gone Wild
Join Date: Jul 2008
Location: Slums of Lake Erie
Posts: 3,721
|
Re: 96 CC 48v no go
Did you look in manual?
|
|
|
|
|
09-26-2009, 03:09 PM
|
#3 |
|
Gone Wild
Join Date: Sep 2009
Location: DOVER,DE
Posts: 533
|
Re: 96 CC 48v no go
don't have one,where can on be purchased?Thanx Dave
|
|
|
|
|
09-26-2009, 03:23 PM
|
#4 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,399
|
Re: 96 CC 48v no go
This Trouble-shooting guide looked alot different when I copied it to paste here....
 .    |
|
|
|
|
09-26-2009, 04:14 PM
|
#5 |
|
Gone Wild
Join Date: Mar 2009
Location: Roseville, CA
Posts: 2,757
|
Re: 96 CC 48v no go
Nice try ScottyB but you can't read the paste. I copied it to file and blew it up, still no go. What was all that other stuff? FUBAR.
|
|
|
|
|
09-26-2009, 04:19 PM
|
#6 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,399
|
Re: 96 CC 48v no go
I guess I could email it?
|
|
|
|
|
09-26-2009, 04:23 PM
|
#7 |
|
Gone Wild
Join Date: Mar 2009
Location: Roseville, CA
Posts: 2,757
|
Re: 96 CC 48v no go
Maybe the OP would like it, I was just looking. Have a good one!
|
|
|
|
|
09-26-2009, 04:26 PM
|
#8 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,399
|
Re: 96 CC 48v no go
Too bad those pdf files don't copy and paste to the board? Any one know how to do that?
|
|
|
|
|
09-26-2009, 04:32 PM
|
#9 |
|
Gone Wild
Join Date: Mar 2009
Location: Roseville, CA
Posts: 2,757
|
Re: 96 CC 48v no go
I don't know of a way to post a PDF. I convert the PDF to a photo and then post. You will need to have a program to do this, I use adobe acrobat.
|
|
|
|
|
09-27-2009, 01:37 PM
|
#10 | |
|
just leave me alone
Join Date: Aug 2008
Location: Tennessee
Posts: 5,643
|
Re: 96 CC 48v no go
Quote:
then manage attachments and picked the pdf You can't see it until you click but , hey things are tough all over ! |
|
|
|
|
Linear Mode
