|
|
|||||||
| Electric Club Car Electric DS, and Precedent golf cars |
  |
|
|
Thread Tools | Display Modes |
11-08-2009, 02:18 PM
|
#21 |
|
Happy Carting
 Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: Problems changing Solenoid
Those readings indicate that the solenoid is activated... If it doesn't deactivate (click) when you turn the cart on/off then it is hot all the time and not wired correctly?
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
11-08-2009, 02:23 PM
|
#22 | |
|
Gone Wild
Join Date: May 2009
Location: SW Florida
Posts: 164
|
Re: Problems changing Solenoid
Quote:
I have taken the solenoid out and reinstalled as per the wiring diagram and still nothing. |
|
|
|
|
|
11-08-2009, 05:28 PM
|
#23 |
|
Gone Wild
Join Date: May 2009
Location: SW Florida
Posts: 164
|
Re: Problems changing Solenoid
Removed the three micro switches and found the 3rd one (inside to the speed control) was defective, Changed it with nbr 2 which I believe is for the Reverse buzzer and when I tried the go pedal, I heard a spark. I believe that I also heard the solenoid click at the same time. Don't know what shorted but now I get nothing again.
Perhaps I need to find some new micro switches. Any suggestions? |
|
|
|
|
11-12-2009, 06:49 PM
|
#24 |
|
Gone Wild
Join Date: May 2009
Location: SW Florida
Posts: 164
|
Re: Problems changing Solenoid
Fixed..The Diode on the Solenoid was shorted, had power going both ways.
|
|
|
|
|
11-12-2009, 10:40 PM
|
#25 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: Problems changing Solenoid
Great to hear that! Sometimes hard for us to say what is wrong. Is it still fixed today? On another note it is hard for some of us to follow the whole red wire, yellow wire description as the colors change year to year and model to model.... as techs we are more inclined to identify wires as to their origin and/or function... Anyway, real glad you have success!
 |
|
|
|
|
11-13-2009, 11:25 AM
|
#26 |
|
Gone Wild
Join Date: May 2009
Location: SW Florida
Posts: 164
|
Re: Problems changing Solenoid
Yes, it runs just like it used too. Also changed two of the micro switches now I have the Reverse Buzzer working again although I just might disconnect it cause it is a pain.
Thanks for all the leads and assistance. |
|
|
|
|
11-14-2009, 09:35 AM
|
#27 |
|
Gone Wild
Join Date: Sep 2009
Location: DOVER,DE
Posts: 533
|
Re: Problems changing Solenoid
Hey Old,before you disconnect the reverse horn there is a vid on U-tube you should watch,guy gets off his boat into his cart hits the go pedal and guess what????A wet cart is much more pain.My wife just hit her own car explain that one to the insurance co.Both of mine now have working horns...Dave
|
|
|
|
|
11-14-2009, 11:06 AM
|
#28 | |
|
Gone Wild
Join Date: May 2009
Location: SW Florida
Posts: 164
|
Re: Problems changing Solenoid
Quote:
 |
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| electric 96cc still having solenoid/want run problems | Electric Club Car | |||
| Problems with Controller, Solenoid, or both? | Electric EZGO | |||
| Solenoid problems | Electric Club Car | |||
| Solenoid problems | Electric Club Car | |||
| Changing from 6-8v to 8-6v | Electric Club Car | |||
Linear Mode
