HELP.... Newbie

[twink288b]

Originally Posted by skm2006

twink - something to think about before you start drilling holes.

Plan out your dash for any future mods you might add. (12 volt plug, iPod holder, toggle switch's etc, etc.)

I didnt do this and didnt think about ever adding anything else. Few months later, I wanted too, but I had put something smack in the middle and wasted room and space.

Just my .02

I did sir, thanks for head up

[twink288b]

also I cant find a step drill that goes up to 2 1/4 at all.... look like a hole saw job

[golfcarfixer]

Ok you are in new castle and I am in sussex but if you need to know something just let us know.We are all like the federal Goverment,we are here to help.

[twink288b]

Originally Posted by golfcarfixer

Ok you are in new castle and I am in sussex but if you need to know something just let us know.We are all like the federal Goverment,we are here to help.

lol, too funny - I have a place in West Bay in Lewes also... so if I can't figure it out before memorial day weekend I will swing by....

thanks, Twink

[golfcarfixer]

I am on rt.24 in millsboro and I am beside a restaraunt and the name C/A golf cars on the building.Stop in and say hi would like to meet ya.

[twink288b]

ok, will do sir... have a good night

[golfcarfixer]

West Bay park? Shucks everybody in there knows me.talk to ya.

[flasharps]

Originally Posted by scottyb

I wire all mine to the key switch just to save wire...... I see no bouncing?

You attached both wires to the key switch?

[twink288b]

no, i didnt wire anything yet.... i was reading other threads and people had complaints analog vs digital.... everyone was against analog because of inaccurate reading while underway

[flasharps]

Gotcha! I was told you could wire the led meter directly to the on/off switch. Is this true?