Programming alltrax controller

cheapjeep2 · 12-06-2010, 04:08 PM

Quote:

Originally Posted by scottyb

I was not able to run my cable on my 64bit system, so I have the old computer set aside for programming.... hope this helps....

x2.. I have an old PC on XP and you do have to have a driver installed for your cable.

kgsc · 12-06-2010, 10:38 PM

Quote:

Originally Posted by cheapjeep2

x2.. I have an old PC on XP and you do have to have a driver installed for your cable.

I had the same problem with my setup. It turned out to be the driver. It would "see" the usb/serial adapter but would not communicate. I fixed it by searching the web for a driver for the chipset in the adapter itself. Found one for Vista, loaded it and was good to go. Good luck.

rabbitreborn · 12-07-2010, 01:17 AM

I went out and bought a $219 netbook that runs Windows XP from CompUSA. I now have it running both the Alltrax program as well as the Curtis program.

What is it with the controller manufacturers that they don't bother updating their software for newer operating systems? The software for the Curtis controllers won't run on Vista or Windows 7 no matter what cable/driver/chipset you use.......

scottyb · 12-07-2010, 09:44 AM

Let's face it controller programming is 10 years behind.... I have not seen much change since the beginning...

kgsc · 12-07-2010, 08:30 PM

I am running the Alltrax software on Vista Pro with a $15 Prolific PL2303 chipset adapter. Don't know about the Curtis software.

12-07-2010, 01:17 AM	#13
rabbitreborn Gone Wild Join Date: Jun 2010 Location: Central Florida Posts: 2,757	Re: Programming alltrax controller I went out and bought a $219 netbook that runs Windows XP from CompUSA. I now have it running both the Alltrax program as well as the Curtis program. What is it with the controller manufacturers that they don't bother updating their software for newer operating systems? The software for the Curtis controllers won't run on Vista or Windows 7 no matter what cable/driver/chipset you use.......

12-07-2010, 09:44 AM	#14
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,406	Re: Programming alltrax controller Let's face it controller programming is 10 years behind.... I have not seen much change since the beginning...

12-07-2010, 08:30 PM	#15
kgsc Gone Wild Join Date: Dec 2009 Location: Aiken, SC Posts: 13,140	Re: Programming alltrax controller I am running the Alltrax software on Vista Pro with a $15 Prolific PL2303 chipset adapter. Don't know about the Curtis software.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
Programming Curtis Controller	Electric golf carts
Alltrax Programming Question	Electric EZGO
Bench programming alltrax	Electric EZGO
what is the best programming for an alltrax controller	Electric EZGO
Alltrax axe programming	Electric EZGO

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum