Robin engine question

petewilliams · 02-16-2012, 08:14 AM

I have a model eh2c robin and I can't seem to get any fuel. I have pulled the pump apart cleaned it and now I have the carb on the bench. My question is could it be a vacuum problem from the engine or do I clean the hell out of the carb? I don't do to much work on these engines so any help would be great

Thanks
Pete

petewilliams · 02-16-2012, 09:06 AM

Ya and I should have checked this first but NO COMPRESSION

racin161 · 02-16-2012, 09:20 AM

OPPS PETE sorry about that. Well guess it's time at least for an upper end kit. Keep us posted OH and by all means CHANGE THE CRANK SEALS while you have it out K.

LOU

petewilliams · 02-16-2012, 10:00 AM

Nope just a timing belt.

Whats the procedure for installing a new timing belt?

scottyb · 02-16-2012, 10:17 AM

Pull the clutch. It may be easier to pull the motor and do this on the bench. Or jack the motor up to get frame clearance to operate the puller. You will see once you get the puller in hand. Most likely you need to get an impact on the puller.
Once the clutch is off, remove timing belt cover & replace belt while timing marks are lined up as shown in the service manual. (this info in the stickies)
Adjust the belt tension & replace the cover. Re install the clutch & adjust the valves .

petewilliams · 02-16-2012, 10:59 AM

Thanks for all the help.

scottyb · 02-16-2012, 11:01 AM

NO problem

We like to help!

petewilliams · 02-27-2012, 09:18 AM

Ok so I replaced the timing belt and still no good. I did another compression test and no compression. Looked inside cylinder and one piston moves bot the one near the clutch side of engine stuck. I thought I had a engine manual on the shelf but no luck can anyone give me some info. thanks again

Doc's BoneCracker · 03-01-2012, 06:34 AM

Quote:

Originally Posted by petewilliams

Ok so I replaced the timing belt and still no good. I did another compression test and no compression. Looked inside cylinder and one piston moves bot the one near the clutch side of engine stuck. I thought I had a engine manual on the shelf but no luck can anyone give me some info. thanks again

Look in the tech section there's all the manuals you will ever need.

02-16-2012, 08:14 AM	#1
petewilliams Not Yet Wild Join Date: Sep 2009 Posts: 63	Robin engine question I have a model eh2c robin and I can't seem to get any fuel. I have pulled the pump apart cleaned it and now I have the carb on the bench. My question is could it be a vacuum problem from the engine or do I clean the hell out of the carb? I don't do to much work on these engines so any help would be great Thanks Pete
petewilliams Not Yet Wild Join Date: Sep 2009 Posts: 63

02-16-2012, 09:06 AM	#2
petewilliams Not Yet Wild Join Date: Sep 2009 Posts: 63	Re: Robin engine question Ya and I should have checked this first but NO COMPRESSION
petewilliams Not Yet Wild Join Date: Sep 2009 Posts: 63

02-16-2012, 09:20 AM	#3
racin161 Gone Wild Join Date: Feb 2011 Posts: 1,515	Re: Robin engine question OPPS PETE sorry about that. Well guess it's time at least for an upper end kit. Keep us posted OH and by all means CHANGE THE CRANK SEALS while you have it out K. LOU
racin161 Gone Wild Join Date: Feb 2011 Posts: 1,515

02-16-2012, 10:00 AM	#4
petewilliams Not Yet Wild Join Date: Sep 2009 Posts: 63	Re: Robin engine question Nope just a timing belt. Whats the procedure for installing a new timing belt?
petewilliams Not Yet Wild Join Date: Sep 2009 Posts: 63

02-16-2012, 10:17 AM	#5
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,410	Re: Robin engine question Pull the clutch. It may be easier to pull the motor and do this on the bench. Or jack the motor up to get frame clearance to operate the puller. You will see once you get the puller in hand. Most likely you need to get an impact on the puller. Once the clutch is off, remove timing belt cover & replace belt while timing marks are lined up as shown in the service manual. (this info in the stickies) Adjust the belt tension & replace the cover. Re install the clutch & adjust the valves .

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

02-16-2012, 10:59 AM	#6
petewilliams Not Yet Wild Join Date: Sep 2009 Posts: 63	Re: Robin engine question Thanks for all the help.
petewilliams Not Yet Wild Join Date: Sep 2009 Posts: 63

02-16-2012, 11:01 AM	#7
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,410	Re: Robin engine question NO problem We like to help!

02-27-2012, 09:18 AM	#8
petewilliams Not Yet Wild Join Date: Sep 2009 Posts: 63	Re: Robin engine question Ok so I replaced the timing belt and still no good. I did another compression test and no compression. Looked inside cylinder and one piston moves bot the one near the clutch side of engine stuck. I thought I had a engine manual on the shelf but no luck can anyone give me some info. thanks again
petewilliams Not Yet Wild Join Date: Sep 2009 Posts: 63

Similar Threads
Thread	Forum
Need Help With 295 Robin Engine	Gas EZGO
robin 295 engine removal 97 txt	Gas EZGO
EZ GO 2PG Robin Engine	Gas EZGO
robin engine mod	Gas EZGO
89 Robin Engine Does this engine have points??	Gas EZGO