lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas EZGO
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV.



Post New Thread  Reply
 
Thread Tools Display Modes
Old 03-04-2012, 09:53 AM   #1
Jammer5658
Not Yet Wild
E-Z-GO
 
Join Date: Apr 2010
Location: Dardanelle, Arkansas
Posts: 14
Default Need some advise with factory spindles on RXV

I have been Chasing a rattle in my front end of my 2008 RXV. I have finally realized it was coming from the spindle. It has enough slack in the kingpin that it is letting the spindle move in and out at the top and bottom where it mounts on the shock tower bracket. Bolt and nut that goes through kingpin was tight. Thrust washer on top of spindle looked ok. Any suggestions or updates on fixing this would be greatly appreciated.
Jammer5658 is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas EZGO


Thread Tools
Display Modes


Similar Threads
Thread Forum
Club Car Spindles Golf Carts and Parts
wtb spindles Golf Carts and Parts
Bent Spindles 09 ST Lifted Golf Carts
Bent spindles? Gas EZGO
ezgo spindles Golf Carts and Parts


All times are GMT -5. The time now is 10:06 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2021, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. 2006-2017 Buggiesgonewild.com. All rights reserved.