char9449

char9449 · 04-05-2012, 04:53 PM

New owner or EZGO service cart---it is to hight geared to get up hills, runs good on the the flats---need instruction on how to increase toque.

rib33024 · 04-05-2012, 05:54 PM

welcome to BGW

when you need help with your cart, it helps to post what cart were talking about

a shorter belt will help with the low end, but you will loose a little top end, check out these links

http://www.buggiesgonewild.com/gas-e...rter-belt.html

http://www.buggiesgonewild.com/ezgo-...en-clutch.html

http://www.buggiesgonewild.com/searc...RID%3A11&hl=en

char9449 · 04-06-2012, 11:22 PM

just got a 1987 1200 EZGO workhorse need to find another CVT ( clutch) the one that drives off the engine.

please

hilla · 04-06-2012, 11:47 PM

I would start with Tom at CPP, one of the boards sponsors, from what I understand he is the guru on clutches. Click on Site Sponsors at the top of the page and you will find a link to their site and a phone number.

char9449 · 04-07-2012, 05:55 AM

Thank you belt helped a bit, must look into 28' driven clutch

char9449 · 04-07-2012, 06:13 AM

Thank you very helpful--i have discovered that i have an older 1200 model workhorse with a 295 gas power. It still runs well on the flat. I adjusted the thingeybob on the rear end and got a smaller blet. But believe i need to get into the driven clutch and replace or rebuild. I am also in the market for and electric ram to dump the cargo box, good used one if there is one out there?

04-05-2012, 04:53 PM	#1
char9449 Not Yet Wild Join Date: Apr 2012 Location: high desert Posts: 5	char9449 New owner or EZGO service cart---it is to hight geared to get up hills, runs good on the the flats---need instruction on how to increase toque.

04-05-2012, 05:54 PM	#2
rib33024 ...................... Join Date: Apr 2009 Location: FT Lauderdale FL. Posts: 16,416	Re: char9449 welcome to BGW when you need help with your cart, it helps to post what cart were talking about a shorter belt will help with the low end, but you will loose a little top end, check out these links http://www.buggiesgonewild.com/gas-e...rter-belt.html http://www.buggiesgonewild.com/ezgo-...en-clutch.html http://www.buggiesgonewild.com/searc...RID%3A11&hl=en

04-06-2012, 11:22 PM	#3
char9449 Not Yet Wild Join Date: Apr 2012 Location: high desert Posts: 5	char9449 just got a 1987 1200 EZGO workhorse need to find another CVT ( clutch) the one that drives off the engine. please

04-06-2012, 11:47 PM	#4
hilla Gone Wild Join Date: Dec 2010 Location: Conway Springs Ks Posts: 159	Re: char9449 I would start with Tom at CPP, one of the boards sponsors, from what I understand he is the guru on clutches. Click on Site Sponsors at the top of the page and you will find a link to their site and a phone number.

04-07-2012, 05:55 AM	#5
char9449 Not Yet Wild Join Date: Apr 2012 Location: high desert Posts: 5	Re: char9449 Thank you belt helped a bit, must look into 28' driven clutch

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

04-07-2012, 06:13 AM	#6
char9449 Not Yet Wild Join Date: Apr 2012 Location: high desert Posts: 5	Re: char9449 Thank you very helpful--i have discovered that i have an older 1200 model workhorse with a 295 gas power. It still runs well on the flat. I adjusted the thingeybob on the rear end and got a smaller blet. But believe i need to get into the driven clutch and replace or rebuild. I am also in the market for and electric ram to dump the cargo box, good used one if there is one out there?