|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
04-16-2014, 03:57 PM | #1 |
Getting Wild
Join Date: Aug 2008
Location: Honea Path, SC
Posts: 88
|
g16 drive clutch
I have one weight jumping out and locking the clutch in closed position. All rollers that ride against the weights have flat spots. Are these flat spots normal.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-16-2014, 04:16 PM | #2 |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,875
|
Re: g16 drive clutch
No. You can get a new roller pin kit (3 steel rollers and 3 steel pins) from site sponsor www.cartpartsplus.com You might as well order the primary sheave puller also!
|
04-16-2014, 09:30 PM | #3 |
Getting Wild
Join Date: Aug 2008
Location: Honea Path, SC
Posts: 88
|
Re: g16 drive clutch
Thanks for the info. Ordered parts, but did not see a sheave puller on the website
|
04-17-2014, 01:56 PM | #4 |
South LA Coonass
Join Date: Mar 2014
Location: New Iberia, LA
Posts: 531
|
Re: g16 drive clutch
|
04-17-2014, 03:58 PM | #5 |
Getting Wild
Join Date: Aug 2008
Location: Honea Path, SC
Posts: 88
|
Re: g16 drive clutch
I have that puller, but I need guidance on disassemling the clutch to install new rollers
|
04-17-2014, 04:11 PM | #6 |
Gone Wild
Join Date: Sep 2010
Location: ontario
Posts: 182
|
Re: g16 drive clutch
If u do a search Yamaha golf cart clutch on you tub there is step by step instructions
|
04-17-2014, 06:31 PM | #7 |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,875
|
Re: g16 drive clutch
Once clutch assy is off, put the fixed sheave into a good vise. Since you don't have the "special" tool for unscrewing the "spider', you can heat he spider/fixed sheave threads with a propane torch (to loosen the loctite) and use a pipe wrench to unscrew it "counter clockwise". Clean everthing up and reinstall.
|
04-17-2014, 08:27 PM | #8 |
Getting Wild
Join Date: Aug 2008
Location: Honea Path, SC
Posts: 88
|
Re: g16 drive clutch
Did not think to search utube. Thanks hello and small block. Disassembly was a breeze. Waiting on parts.
|
04-23-2014, 09:42 AM | #9 |
Gone Wild
Join Date: Sep 2013
Posts: 247
|
Re: g16 drive clutch
yep, there are a few videos on complete dis assembly, not to bad, but you will need a large vise;;;
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Replace Drive Clutch Spring Without Removing Clutch? | Gas EZGO | |||
Tips & Hints for installing Clutch Tuning Kit, Removal of Drive Clutch | Gas Club Car | |||
High Altitude Drive Clutch and Drive Belt | Gas EZGO | |||
Is it the Drive Clutch or Drive belt? | Gas EZGO |