|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
07-01-2014, 10:22 AM | #1 |
Gone Wild
Join Date: Oct 2013
Posts: 473
|
Widen the Stance
Hey Fellas, its been a while since i've posted anything... still lurking thou
:D Here's my cart as she stands now 10469218_10204370140960048_1244165974731087232_n.jpg 10478449_10204370139600014_8640996109649934527_n.jpg the problem i'm having is that it's really top heavy, i'm sure the roll cage and the seat height have some influence, but even when it was bone stock it would nearly flip over when id take a hard corner.. So far i have the 4" lift kit and the 2" billet spacers... what i'd like to do is somehow replicate the front lift kit and for one, move the a-arms forward about an inch as the left wheel always contacts the frame when its fully compressed and turned left.. and i'd like to widen the stance maybe by 2" per side... any suggestions? |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-02-2014, 06:37 AM | #2 |
Searching for The Way
Join Date: Oct 2009
Location: Medina, Ohio (NEOHIO)
Posts: 11,436
|
Re: Widen the Stance
Long travel lift kit, best money you'll ever spend. Then use wider wheels/tires or wheels with an offset.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
How wide of a stance after lift kit on club car ds | Electric Club Car | |||
EZGO Lift - should you widen the rear. | Lifted Golf Carts |