G9 Yamaha has been sitting a while

yanmarman · 07-15-2014, 10:09 PM

Hey guys,
seen and read a lot of good info on here. Thanks!!!
I have recently aquired my dad's old g9 (1991 model) it has been sitting for about 2 years.
I have removed all of old gas, cleaned out carb, new plug, new belts, new battery, new air filter, changed oil, pressure washed.
What else do I need to do to this G9 ? I'm sure there is something I'm over looking.

1989Marathon · 07-15-2014, 10:40 PM

Welcome to BGW!!!
Change the rearend oil, check the brakes, and have fun with it.

Mike Mac · 07-15-2014, 10:49 PM

One pump of grease in each zirk on each clutch!! THEN, rotate the wheels MAN!!

yanmarman · 07-16-2014, 08:45 PM

Thanks guys, any sugestions on the brake pedal? You have to pull it back up after each use. sprayed what was easily visible with PB Blaster. Still not working right.

Mike Mac · 07-16-2014, 09:35 PM

The spring is broken down by the brake pedal shaft. Probably be a B...... to get off.

sho305 · 07-17-2014, 07:12 PM

The bolt can rust into the pedal, or corrode I suppose. Start spraying it down now with PB every few days or something. I did mine twice finally had to drill the pedal larger. I filled it with wheel bearing grease each time. The spring does get weak my new one worked like a charm but still had to fix the bolt so it moved freely. Its been working nice for years after I drilled it out.

yanmarman · 07-20-2014, 06:34 PM

thanks. I'll give it a try.

yanmarman · 07-22-2014, 07:49 PM

Thanks sho305,
I ended up pulling the brake assembly apart and cleaning. Bead blasted all rusted parts, greased and put back together. Works great!!!!
Thanks

07-15-2014, 10:09 PM	#1
yanmarman Not Yet Wild Join Date: Jul 2014 Posts: 6	G9 Yamaha has been sitting a while Hey guys, seen and read a lot of good info on here. Thanks!!! I have recently aquired my dad's old g9 (1991 model) it has been sitting for about 2 years. I have removed all of old gas, cleaned out carb, new plug, new belts, new battery, new air filter, changed oil, pressure washed. What else do I need to do to this G9 ? I'm sure there is something I'm over looking.
yanmarman Not Yet Wild Join Date: Jul 2014 Posts: 6

07-15-2014, 10:40 PM	#2
1989Marathon Gone Wild Join Date: Oct 2010 Posts: 6,730	Re: G9 Yamaha has been sitting a while Welcome to BGW!!! Change the rearend oil, check the brakes, and have fun with it.
1989Marathon Gone Wild Join Date: Oct 2010 Posts: 6,730

07-15-2014, 10:49 PM	#3
Mike Mac G8 Specialist Join Date: Jun 2009 Location: Phoenix Posts: 7,799	Re: G9 Yamaha has been sitting a while One pump of grease in each zirk on each clutch!! THEN, rotate the wheels MAN!!

07-16-2014, 08:45 PM	#4
yanmarman Not Yet Wild Join Date: Jul 2014 Posts: 6	Re: G9 Yamaha has been sitting a while Thanks guys, any sugestions on the brake pedal? You have to pull it back up after each use. sprayed what was easily visible with PB Blaster. Still not working right.
yanmarman Not Yet Wild Join Date: Jul 2014 Posts: 6

07-16-2014, 09:35 PM	#5
Mike Mac G8 Specialist Join Date: Jun 2009 Location: Phoenix Posts: 7,799	Re: G9 Yamaha has been sitting a while The spring is broken down by the brake pedal shaft. Probably be a B...... to get off.

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

07-17-2014, 07:12 PM	#6
sho305 Vegas modded 420 Join Date: Jun 2009 Location: West MI Posts: 15,443	Re: G9 Yamaha has been sitting a while The bolt can rust into the pedal, or corrode I suppose. Start spraying it down now with PB every few days or something. I did mine twice finally had to drill the pedal larger. I filled it with wheel bearing grease each time. The spring does get weak my new one worked like a charm but still had to fix the bolt so it moved freely. Its been working nice for years after I drilled it out.

07-20-2014, 06:34 PM	#7
yanmarman Not Yet Wild Join Date: Jul 2014 Posts: 6	Re: G9 Yamaha has been sitting a while thanks. I'll give it a try.
yanmarman Not Yet Wild Join Date: Jul 2014 Posts: 6

07-22-2014, 07:49 PM	#8
yanmarman Not Yet Wild Join Date: Jul 2014 Posts: 6	Re: G9 Yamaha has been sitting a while Thanks sho305, I ended up pulling the brake assembly apart and cleaning. Bead blasted all rusted parts, greased and put back together. Works great!!!! Thanks
yanmarman Not Yet Wild Join Date: Jul 2014 Posts: 6

Similar Threads
Thread	Forum
2001 DS won't move after sitting	Electric Club Car
Bought an 02 been sitting for years	Electric EZGO
G16 been sitting for a few years.	Gas Yamaha
How do I start and engine that has been sitting?	Gas EZGO
cart just sitting there	Gas Club Car