|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
11-23-2017, 04:36 PM | #11 |
......................
Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,416
|
Re: 96 EZGO 36V Clunking sound. Need some help
The motor shaft is only supported by the input shaft in the rear end, when the motor is bolted to the rear end. When you look at the diagram posted, you will see a 0 ring in the case of the rear end when you remove the input shaft from the rear end. The 0 ring is what seals the bearing
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
11-25-2017, 09:36 AM | #12 |
Not Yet Wild
Join Date: Oct 2017
Posts: 12
|
Re: 96 EZGO 36V Clunking sound. Need some help
RIB33024, Do you know if there is supposed to be an oil seal in front of the snap ring on the input shaft? I see one in some of the Dana drawings. Mine has just the snap-ring and then the first bearing. You can see a pic of input shaft in my previous post. Also, note the residue on the housing around the input shaft. Is that normal or does it suggest diff oil leaking into this area? Thanks
|
11-26-2017, 10:34 AM | #13 |
......................
Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,416
|
Re: 96 EZGO 36V Clunking sound. Need some help
The 0 ring is the only seal, and the sealed bearing. The residue on the housing around the input shaft Is normal for a cart that old. change the two bearings, and the 0 ring/seal and you will be good
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Clunking sound from crank | Big Block Talk! | |||
2006 Precedent Clunking Sound | Electric Club Car | |||
Growling, clunking sound going forward | Gas EZGO | |||
1996 Club DS clunking sound? | Electric Club Car | |||
95' DS Clunking Sound in Rear End? | Electric Club Car |