|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
06-02-2009, 01:23 AM | #1 |
Gone Wild
Join Date: Nov 2007
Location: Martinsburg, WV
Posts: 651
|
G1 seal question
I was just on one of the site sponsors and they have 2 seals listed for the G1 engines. But they have it listed as crankshaft seal clutch side (large)
and they have crankshaft seal clutch side (small) I thought one seal was for one side of the engine and the other was for the other side of the engine I am now confused. Calvin |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-02-2009, 05:04 AM | #2 |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,010
|
Re: G1 seal question
Yes, there are 2 seals, one is a small diameter and the other one is a larger diameter. One is for the clutch side and the other is for the flywheel side.
|
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
06-02-2009, 06:53 AM | #3 |
Gone Wild
Join Date: Nov 2007
Location: Martinsburg, WV
Posts: 651
|
Re: G1 seal question
Same thing I thought Ron but go to East Coast Custom Carts Inc. they listed it for the clutch side only guess they made a mistake.
Thanks Ron. Calvin |
06-03-2009, 11:53 PM | #4 |
Gone Wild
Join Date: Nov 2007
Location: Martinsburg, WV
Posts: 651
|
Re: G1 seal question
Hi Ron I emailed that sponsor and them them and they were so nice. He said they made a mistake and are changing it and thanked me.
Calvin |
06-04-2009, 04:51 AM | #5 |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,010
|
Re: G1 seal question
Good job Calvin!
|
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
08-06-2009, 06:50 PM | #6 |
Not Yet Wild
Join Date: Aug 2008
Posts: 43
|
Re: G1 seal question
does anyone remember the reply that had a neat process for installing g-1 crank seals with pvc pipe and large washers. I can't find it
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Blown out crank seal again and again | Gas EZGO | |||
crankshaft seal install method | Gas Yamaha | |||
crank seal question g-1 | Gas Yamaha | |||
trouble putting in crankshaft seal | Gas Yamaha | |||
g1 crank seal replacement | Gas Yamaha |