Curtis 1236 controller BDI values

cbpeps · 07-04-2010, 03:33 PM

I have a Curtis 1236 ac controller in a 48 volt golf cart with 8 6 volt Trojan T-105 batteries. The cart does not get nuch distance before dropping into limp home mode. Does anyone know what would be reasonable values for the BDI algorithm.. It is currently programmed with Full volts per cell 2.12; Empty volts per cell 2.05; and Discharge Time 45. I suspect the 45 minute Discharge Time is way too low, but don't know. Any help would be appreciated.

cbpeps · 07-05-2010, 07:46 AM

Quote:

Originally Posted by cbpeps

I have a Curtis 1236 ac controller in a 48 volt golf cart with 8 6 volt Trojan T-105 batteries. The cart does not get nuch distance before dropping into limp home mode. Does anyone know what would be reasonable values for the BDI algorithm.. It is currently programmed with Full volts per cell 2.12; Empty volts per cell 2.05; and Discharge Time 45. I suspect the 45 minute Discharge Time is way too low, but don't know. Any help would be appreciated.

vaishnavi · 01-13-2011, 01:53 AM

HI,

I am using 48V, 100A battery and 1236 controller. Discharge time = 36 minutes. With 10A battery is discharged for 1hr 20 min, but the BDI percentage is not changing. It was showing the same value = 98 %. I have switched off the system and checked the value after 30 minutes, but still showing the same BDI percentage as 98%.How to get the correct BDI percentage.

Regards,

Vaishnavi

stepin.vijay · 03-09-2011, 04:54 AM

Are you Vaishnavi from kpit???

vaishnavi · 03-10-2011, 07:19 AM

07-04-2010, 03:33 PM	#1
cbpeps Not Yet Wild Join Date: Aug 2009 Posts: 17	Curtis 1236 controller BDI values I have a Curtis 1236 ac controller in a 48 volt golf cart with 8 6 volt Trojan T-105 batteries. The cart does not get nuch distance before dropping into limp home mode. Does anyone know what would be reasonable values for the BDI algorithm.. It is currently programmed with Full volts per cell 2.12; Empty volts per cell 2.05; and Discharge Time 45. I suspect the 45 minute Discharge Time is way too low, but don't know. Any help would be appreciated.
cbpeps Not Yet Wild Join Date: Aug 2009 Posts: 17

01-13-2011, 01:53 AM	#3
vaishnavi Not Yet Wild Join Date: Jan 2011 Posts: 2	Re: Curtis 1236 controller BDI values HI, I am using 48V, 100A battery and 1236 controller. Discharge time = 36 minutes. With 10A battery is discharged for 1hr 20 min, but the BDI percentage is not changing. It was showing the same value = 98 %. I have switched off the system and checked the value after 30 minutes, but still showing the same BDI percentage as 98%.How to get the correct BDI percentage. Regards, Vaishnavi
vaishnavi Not Yet Wild Join Date: Jan 2011 Posts: 2

03-09-2011, 04:54 AM	#4
stepin.vijay Not Yet Wild Join Date: Mar 2011 Posts: 1	Re: Curtis 1236 controller BDI values Are you Vaishnavi from kpit???
stepin.vijay Not Yet Wild Join Date: Mar 2011 Posts: 1

03-10-2011, 07:19 AM	#5
vaishnavi Not Yet Wild Join Date: Jan 2011 Posts: 2	Re: Curtis 1236 controller BDI values yes
vaishnavi Not Yet Wild Join Date: Jan 2011 Posts: 2

Similar Threads
Thread	Forum
Curtis controller	Electric EZGO
Curtis controller	Garage and Workshop
Looking for tech curtis 1236 ac controller	Electric Club Car
programming curtis ac controller	Electric Club Car
Help ID an old Curtis Controller ???	Extreme DC!

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum