|
Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
06-07-2012, 05:09 PM | #1 |
Not Yet Wild
Join Date: May 2009
Posts: 20
|
bypassing g19e solenoid
The solenoid on my wife's g19 is broken, the small terminals rusted off. If I understand right this solenoid is connected to the run/tow switch. That being said, can I connect the two main leads together until the new solenoid arrives? Thanks
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-07-2012, 08:44 PM | #2 |
Getting Wild
Join Date: Apr 2012
Posts: 110
|
Re: bypassing g19e solenoid
i would wait for the new one it could short out the controller.
|
06-08-2012, 09:08 AM | #3 |
Not Yet Wild
Join Date: May 2009
Posts: 20
|
Re: bypassing g19e solenoid
Thanks for your response, for my own learning, what is the concern with the controller? Is the solenoid only controlled by the tow/run switch? Thanks
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Yamaha G19E Electric Solenoid Wiring Issue | Electric Yamaha | |||
96 Yamaha G19E solenoid dont engage!! Need help! | Electric Yamaha | |||
Bypassing the solenoid | Electric Club Car | |||
Bypassing the OBC on Precedent? | Electric Club Car | |||
Almost bypassing the GOV!! 30mph | Gas Yamaha |