lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV.



Post New Thread  Reply
 
Thread Tools Display Modes
Old 08-17-2014, 06:53 PM   #1
Smowat
Not Yet Wild
 
Join Date: Aug 2014
Posts: 2
Default Wiring turn signal

I just purchase a tun signal kit for my 2010 Ezgo the dealer assured me it was the correct model but they are closed on the weekend so can't call them to double check. I will do first thing Monday morning but figured maybe someone had come across this problem themselves.

My turn signal kit is a 7 wire has a port for the harness with 5 plugs that plugs in just fine. My issue is there are 2 more cables to plug in one from the harness and one from the solenoid they are supposed to plug into a black and a red which I don't have. Is this the wrong kit for my cart or am I missing the cables? This is a custom cart that has a 12v port in the dash could they have used the cables that I would need for the turn signal for the 12v? Is there any quick fixes?
Smowat is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 08-17-2014, 07:06 PM   #2
Epb
Gone Wild
Club Car
 
Join Date: Mar 2012
Location: Katy, Tx
Posts: 1,027
Default Re: Wiring turn signal

That appears to be your + & -. I would guess the cables you need were used for the 12v port. You need 12v for your turn signal. I would tap those wires but i wouldnt use both accessories at the same time. Eventually you need to run a separate + from a fuse block with 10 or 15 amp fuse. The neg would be fine to piggy off of. Imo
Epb is offline   Reply With Quote
Old 08-18-2014, 04:27 PM   #3
Smowat
Not Yet Wild
 
Join Date: Aug 2014
Posts: 2
Default Re: Wiring turn signal

So I called the dealership today and thought of share the answer.

So apparently when Ezgo refurbish these carts they add the 12 port and use the +/- from the lighting wiring harness. The dealership recommended just splicing the +/- since the 12v won't pull much a amperage. I picked up the supplies today so I will work on that wiring tonight.
Smowat is offline   Reply With Quote
Old 08-18-2014, 08:06 PM   #4
Epb
Gone Wild
Club Car
 
Join Date: Mar 2012
Location: Katy, Tx
Posts: 1,027
Default Re: Wiring turn signal

Im glad you have confirmation and can move forward.
Epb is offline   Reply With Quote
Reply

Tags
ezgo, turn signal, wiring
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO


Thread Tools
Display Modes


Similar Threads
Thread Forum
Wiring turn signal to only work when key is on Electric EZGO
Turn signal wiring Electric EZGO
Turn Signal Wiring Help Gas Club Car
turn signal wiring Gas Club Car


All times are GMT -5. The time now is 10:52 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.