|
Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
06-05-2016, 05:16 PM | #11 |
Gone Wild
Join Date: May 2016
Location: California
Posts: 210
|
Re: Xct 48400 alltrax programming issues
Cart does not resist my push. Even though I have a high speed motor from EMP the cart would resist? I swear I read new motors dont have the rollaway feature. Interesting though, because the sensor was fine before i installed the alltrax. I tried swapping sensors with my stock hitachi motor but the sensor on the EMP is much deeper. Any ideas where I can find one?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-05-2016, 05:46 PM | #12 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: Xct 48400 alltrax programming issues
an XCT wont work without a speed sensor? never heard that, but i have not tried it either. i'm thinking the problem is throttle setting related, not speed sensor.
|
06-05-2016, 07:02 PM | #13 |
Gone Wild
Join Date: May 2012
Location: Rio Verde, Az
Posts: 7,173
|
Re: Xct 48400 alltrax programming issues
I think it's the speed sensor since it doesn't resist pushing. You can go into the programming and have it ignore the speed sensor but you want the speed sensor with that controller. Get it working!
|
06-05-2016, 07:31 PM | #14 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: Xct 48400 alltrax programming issues
i would consider it good diagnosis to turn off the speed sensor to see if it magically picks up speed to normal (i think it wont). not saying "screw the speed sensor & its benefits", just trying to get the cart past 8 mph.
|
06-05-2016, 07:38 PM | #15 |
Gone Wild
Join Date: May 2016
Location: California
Posts: 210
|
Re: Xct 48400 alltrax programming issues
I unplugged the sensor and monitored again and got no changes. I think im screwed until i can talk to alltrax. I dont understand why the controller will accept any other throttle input i enter except ydre. Frustrated.
|
06-06-2016, 08:11 AM | #16 |
Gone Wild
Join Date: May 2012
Location: Rio Verde, Az
Posts: 7,173
|
Re: Xct 48400 alltrax programming issues
By Turn off he means go into the Alltrax program and turn off the speed sensor input. I bet you get full speed then. Then go fix your speed sensor.
|
06-06-2016, 11:48 AM | #17 |
Gone Wild
Join Date: May 2016
Location: California
Posts: 210
|
Re: Xct 48400 alltrax programming issues
So I spoke to alltrax this morning, and they said regardless of how many green blinks the controller gives you, if it's properly set in the toolkit, you are good to go. That being said, they were confident with no speed sensor reading the controller was going into limp mode. They advised me to turn off the speed sensor in the toolkit to remedy the problem. However, i removed the harness and noticed a pin was bent. Straightened it out and the cart took me straight to 25mph. Thanks guys!
|
06-06-2016, 12:38 PM | #18 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,410
|
Re: Xct 48400 alltrax programming issues
Glad to hear you got it going ..... but I'm still confused as to why the program does not show YDRE throttle selected?
|
06-06-2016, 01:26 PM | #19 |
Gone Wild
Join Date: May 2016
Location: California
Posts: 210
|
Re: Xct 48400 alltrax programming issues
The toolkit itself shows ydre, but the set throttle code is displayed on the controller by the # of blinks upon startup or when connected to the pc. Manual says 5 blinks is yamaha yet when toolkit says ydre, it blinks 3 times, which is ezgo or something. Either way alltrax said disregard how many blinks you get because what the toolkit tells you is most accurate. Weird.
|
06-06-2016, 02:12 PM | #20 | |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,410
|
Re: Xct 48400 alltrax programming issues
Quote:
instead of the 0-1v we think the Yamaha should be I do remember the CC throttle was originally named incorrectly when the XCT first came out resulting in techs and owners assigning the wrong throttle type. I think this is something like that. Just a program name or signal assignment glitch |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Alltrax programming | Electric EZGO | |||
is $200 a good deal for a NEW alltrax spm-48400 | Electric EZGO | |||
NEW- Alltrax SPM-48400 Motor Controller | Golf Carts and Parts | |||
alltrax programming | Electric EZGO | |||
Alltrax axe programming | Electric EZGO |