|
Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
06-06-2016, 02:13 PM | #21 |
Gone Wild
Join Date: May 2012
Location: Rio Verde, Az
Posts: 7,119
|
Re: Xct 48400 alltrax programming issues
I am almost positive the YDRE is 0-5V Thottle.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-06-2016, 02:39 PM | #22 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: Xct 48400 alltrax programming issues
ydre is all 0-5v (well, not sure about the AC model, they dont have a service manual to sell us yet) . glad to hear its going. i learned something, if rpm limit is enabled, tach sensor must work or else "limp mode", great to know this.
|
06-06-2016, 03:30 PM | #23 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,356
|
Re: Xct 48400 alltrax programming issues
Makes sense right. This control enables many of the OEM safety features.
|
04-25-2017, 11:13 PM | #24 |
Not Yet Wild
Join Date: Apr 2017
Location: Texas
Posts: 14
|
Re: Xct 48400 alltrax programming issues
My cart just did the exact same thing.
2007 YDRE with new 48500 XCT kit from Scottyb. After installing, I had max speed of about 5 mph. After many emails and hours of research, I came across this thread so I bypassed the speed sensor and BAM it works and it's fast!!! So I also checked the pins on the controller and found the bottom left pin completely bent. How did you straighten it out? |
04-25-2017, 11:18 PM | #25 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,356
|
Re: Xct 48400 alltrax programming issues
I have heard also 0-5v but for some reason Alltrax has YDRE and 0-5v in their throttle selections.... Maybe that's because other apps that are not Yami use 0-5v and they tried to avoid confusion for those apps... Maybe the bent pin is the speed sensor? Can anybody verify the pin #?
|
05-01-2017, 03:28 PM | #26 |
Gone Wild
Join Date: May 2016
Location: California
Posts: 210
|
Re: Xct 48400 alltrax programming issues
Mine was bottom left as well, but I cannot confirm the pin #. I used tweezers to straighten.
|
05-01-2017, 04:24 PM | #27 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,356
|
Re: Xct 48400 alltrax programming issues
Thanks for getting back to us - I have seen a few of these. Might be a problem with the Yamaha plug?
|
05-02-2017, 09:46 AM | #28 |
Not Yet Wild
Join Date: Apr 2017
Location: Texas
Posts: 14
|
Re: Xct 48400 alltrax programming issues
I don't know how the rows of pins are counted, but in the manual it shows the speed sensor is pins 24,25,and 26.
If that's the case is pin #1 top left, pin#13 top right, #14bottom right and #26 bottom left like shown? 1 2 3 4 5 6 7 8 9 10 11 12 13 26 25 24 23 22 21 20 19 18 17 16 15 14 |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Alltrax programming | Electric EZGO | |||
is $200 a good deal for a NEW alltrax spm-48400 | Electric EZGO | |||
NEW- Alltrax SPM-48400 Motor Controller | Golf Carts and Parts | |||
alltrax programming | Electric EZGO | |||
Alltrax axe programming | Electric EZGO |