|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
02-06-2017, 09:39 AM | #1 |
Not Yet Wild
Join Date: Feb 2017
Location: Indiana
Posts: 10
|
G2 fender flares
Hi guys. New to site and owning a cart. Looking to see if there is anything out there that some one has found that will fit the G2. Have thought about making some but thought I would check to see if something would fit first.
Thanks |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
02-06-2017, 09:43 AM | #2 |
Gone Wild
Join Date: Jul 2016
Location: Ma
Posts: 425
|
Re: G2 fender flares
Welcome to BGW.
|
02-06-2017, 02:47 PM | #3 |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,047
|
Re: G2 fender flares
Welcome to BGW!
I used this stuff on a G9, worked well. Had to trim the lip off of the wheel opening on the cart first. http://www.ebay.com/itm/Pacer-Performance-52-170-No-Lip-Side-Mount-Flexy-Flares/111539004216?_trksid=p2047675.c100005.m1851&_trkpa rms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D2%26asc%3 D20131003132420%26meid%3D52bc576b9e8f45108fe3b6e12 33e3f00%26pid%3D100005%26rk%3D3%26rkt%3D6%26sd%3D3 31392736264 click pic to enlarge good G9 pic.jpg |
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
02-06-2017, 03:13 PM | #4 |
VC 460 CLONE GONE WILD
Join Date: Oct 2014
Location: Ray BY The Bay NJ
Posts: 10,633
|
Re: G2 fender flares
I used the steeleng set off of ebay for like $72 they worked out fine.
|
02-06-2017, 06:52 PM | #5 |
Not Yet Wild
Join Date: Feb 2017
Location: Indiana
Posts: 10
|
Re: G2 fender flares
Thanks for the info. Will check them out.
|
02-06-2017, 10:55 PM | #6 |
Not Yet Wild
Join Date: Feb 2017
Location: Indiana
Posts: 10
|
Re: G2 fender flares
Raydhd, will the G14 flares work on a G2? Thx
|
02-07-2017, 11:35 AM | #7 |
G8 Club Founding Member
Join Date: Sep 2010
Location: Middle of Virginia, USA
Posts: 4,265
|
Re: G2 fender flares
Another option, if you are handy, is to use garage door molding you can get from the hardware store. I did this on two carts, and turned out pretty good. Also VERY cheap to make. Just need molding, bolts, washers and nuts. (And a bit of patience).
|
02-07-2017, 06:52 PM | #8 |
VC 460 CLONE GONE WILD
Join Date: Oct 2014
Location: Ray BY The Bay NJ
Posts: 10,633
|
Re: G2 fender flares
|
02-08-2017, 06:59 AM | #9 |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,047
|
Re: G2 fender flares
|
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
02-08-2017, 07:11 AM | #10 |
Getting Wild
Join Date: May 2011
Posts: 93
|
Re: G2 fender flares
|
|
|
Similar Threads | ||||
Thread | Forum | |||
CC DS Fender Flares..? | Gas Club Car | |||
Fender Flares | Design Center | |||
'75D fender flares | Gas Harley Davidson | |||
G9 Fender Flares | Lifted Golf Carts | |||
Fender Flares | Lifted Golf Carts |