|
Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
06-30-2017, 05:49 AM | #1 |
Not Yet Wild
Join Date: Oct 2013
Location: Texas
Posts: 70
|
Removing Plastic fastners from floor mat
I have a G29 and want to check under the floor mat to check on the brake pedal area for debree and lube it while there.
I know I must remove the plastic "rivets" and do not want to break them so any hints for that or the removal is appreciated. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-30-2017, 08:18 AM | #2 |
Getting Wild
Join Date: Jul 2016
Location: Bucks County, PA
Posts: 120
|
Re: Removing Plastic fastners from floor mat
I use 2 small screwdrivers to pop them up a little then I have some nail pullers to remove the center rivet the rest of the way. If it comes out completely that's fine, it will just push back in.
Sent from my SM-G935U using Tapatalk |
|
|
Similar Threads | ||||
Thread | Forum | |||
Removing floor mat on 95 CC DS?? | Electric Club Car | |||
Removing 96 TXT floor mat | Electric EZGO | |||
Floor mat plactic Rivet fastners | Design Center | |||
Need good quality snap fastners | Design Center | |||
ratchet fastners or christmas trees - where to find | Gas EZGO |