|
|
|||||||
| Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
11-10-2017, 09:01 PM
|
#1 |
|
Not Yet Wild
Join Date: Oct 2017
Posts: 14
|
G14 running
Just rebuilt the g14. It is bored .25 over. Carb is new and so is fuel pump. Runs fine at idle and if slowly accelerating. Hitting the throttle causes it to stumble till it catches up with itself. The plug is white so it is lean. Any suggestions?
Sent from my SM-G935V using Tapatalk |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
11-11-2017, 01:23 AM
|
#2 |
|
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: G14 running
Airbox all-stock? In perfect shape with good seal, internal baffles, and hose? Did you buy the BS China $20 carb?
|
|
|
|
|
11-11-2017, 12:07 PM
|
#3 |
|
Not Yet Wild
Join Date: Nov 2017
Location: Coventry , RI
Posts: 3
|
Re: G14 running
I agree with cgtech , as G14 owner for over 15 years when mine would do this first thing I would check was air box , etc. for a tight seal .jmo
|
|
|
|
|
11-11-2017, 12:10 PM
|
#4 |
|
Not Yet Wild
Join Date: Oct 2017
Posts: 14
|
Re: G14 running
Air box is warped sealed it with duct tape. Carb was a cheap one off of Amazon. I still have the original. Are there rebuild kits for them?
Sent from my SM-G935V using Tapatalk |
|
|
|
|
11-11-2017, 01:45 PM
|
#5 |
|
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: G14 running
Yamaha generally doesn't sell many "kits", they sell individual pieces. Here's a link. When you find the part numbers, just punch them into your preferred search engine.
https://www.shopyamaha.com/parts-cat...996/CARBURETOR |
|
|
|
|
11-13-2017, 10:02 PM
|
#6 |
|
Not Yet Wild
Join Date: Oct 2017
Posts: 14
|
Re: G14 running
Mounted original carb had same issue. Eliminated the pump filter housing a vac leak from being a cuase. Bach to recleaning carb. Any Tips on how to get a stuck main jet out?
Sent from my SM-G935V using Tapatalk |
|
|
|
|
11-13-2017, 10:05 PM
|
#7 | |
|
Not Yet Wild
Join Date: Oct 2017
Posts: 14
|
Re: G14 running
Quote:
Sent from my SM-G935V using Tapatalk |
|
|
|
|
|
11-14-2017, 08:10 AM
|
#8 | |
|
Not Yet Wild
Join Date: Oct 2017
Posts: 14
|
Re: G14 running
Quote:
Sent from my SM-G935V using Tapatalk |
|
|
|
|
|
11-14-2017, 09:51 PM
|
#9 |
|
Vegas modded 420
 Join Date: Jun 2009
Location: West MI
Posts: 15,443
|
Re: G14 running
Pb blaster and an impact driver? The kind you use a hammer on, used on motorcycles a lot. Some people say put the original jet in the new carb and it works, but you never know what you get with aftermarket carbs. All fails get a torch tip cleaner and file the main out little by little until it runs good, if you know its lean that will work. That is how I jet usually, sometimes I buy a jet when done sometimes I just run that.
|
|
|
|
|
11-15-2017, 09:06 PM
|
#10 |
|
Not Yet Wild
Join Date: Oct 2017
Posts: 14
|
Re: G14 running
still having issue with running lean on high rpm, cleaned carb twice now. Can this maybe be caused by valve adjustment or some other issue?
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| 2005 EZGO TXT motor not running and running jerky | Electric EZGO | |||
| Foreseeable issues running a 36v cart, running at 48v? | Harley Davidson | |||
| 2010 EZGO not running/running very slowly | Electric EZGO | |||
| Running Hot / Dieseling / Running on | Gas Club Car | |||
| Am I running enough oil? | Gas EZGO | |||
Linear Mode
