lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Yamaha
Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles



Post New Thread  Reply
 
Thread Tools Display Modes
Old 10-04-2021, 07:50 PM   #1
meyre1
Not Yet Wild
 
Join Date: Jun 2018
Posts: 59
Default Mounting bolt size for throttle position sensor?

I purchased a 2012 Yamaha g29 cart that was missing the throttle position sensor and mounting bolts. Any one know the size of the 2 bolts?
meyre1 is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 10-04-2021, 09:00 PM   #2
JPonLKN
Gone Wild
 
JPonLKN's Avatar
E-Z-GO
 
Join Date: Jul 2020
Location: NC
Posts: 595
Default Re: Mounting bolt size for throttle position sensor?

It is a 7mm head, but not sure of the thread pitch
JPonLKN is offline   Reply With Quote
Old 10-05-2021, 04:57 AM   #3
ojo
Gone Wild
 
ojo's Avatar
E-Z-GO
 
Join Date: Sep 2020
Location: Germany
Posts: 583
Default Re: Mounting bolt size for throttle position sensor?

Must be metric...
ojo is offline   Reply With Quote
Old 10-05-2021, 08:36 AM   #4
Volt_Ampere
Gone Wild
Yamaha
 
Join Date: May 2012
Location: Rio Verde, Az
Posts: 4,110
Default Re: Mounting bolt size for throttle position sensor?

My G29 has a mix of english and metric but I would guess that part would be metric.
Volt_Ampere is online now   Reply With Quote
Old 10-05-2021, 08:46 AM   #5
ojo
Gone Wild
 
ojo's Avatar
E-Z-GO
 
Join Date: Sep 2020
Location: Germany
Posts: 583
Default Re: Mounting bolt size for throttle position sensor?

I've had that screws out, could be ~ M5 x 20 without guaranty
ojo is offline   Reply With Quote
Old 10-06-2021, 09:15 AM   #6
JPonLKN
Gone Wild
 
JPonLKN's Avatar
E-Z-GO
 
Join Date: Jul 2020
Location: NC
Posts: 595
Default Re: Mounting bolt size for throttle position sensor?

It is a 7mm head, and is a M4x0.7 thread. Just verified it with my tap and die set. 0.7 thread gauge fits, and the M4x0.7 tap threads in the hole.
JPonLKN is offline   Reply With Quote
Old 10-06-2021, 09:40 AM   #7
ojo
Gone Wild
 
ojo's Avatar
E-Z-GO
 
Join Date: Sep 2020
Location: Germany
Posts: 583
Default Re: Mounting bolt size for throttle position sensor?

Ok, sorry for my bad memory...
ojo is offline   Reply With Quote
Old 10-06-2021, 09:12 PM   #8
meyre1
Not Yet Wild
 
Join Date: Jun 2018
Posts: 59
Default Re: Mounting bolt size for throttle position sensor?

Thanks for all the help.
meyre1 is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Yamaha


Thread Tools
Display Modes


Similar Threads
Thread Forum
RXV brakes and position sensor - how does it work to stop the cart? Electric EZGO
Throttle position sensor broken plastic mounting stud Electric EZGO
throttle position sensor reading OL Electric Yamaha
Inductive Throttle Sensor mounting position? Electric EZGO
96 DS stock drive clutch bolt size (exterior bolt) Gas Club Car


All times are GMT -5. The time now is 06:32 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2021, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. 2006-2017 Buggiesgonewild.com. All rights reserved.