Governor gone, need parts

[Mike Walters]

I am a new user to the site and a new owner of an old cart. I just picked up a very used 1994 Jacobsen (seems like it is the same as the EZGO marathon) with a dump bed. Cool little toy! But, the previous owner removed the governor. He attached a bracket to the cross member giving the throttle cable a 180 degree bend back towards the carburator and attached the cable directly to the throttle lever. All the brackets, rods and springs that attached to the transaxle assembly are missing. It has the Robins 295 4 cylinder engine. I really want to thank "Popatop" for the link to
the governor thread,

[URL="http://www.buggiesgonewild.com/ezgo-gas-tech/1181-ezgo-governor-adjustment-4-strokes.html"]

and a special thanks to "Ruredy" for posting the pictures. So, now I know what I need, does anybody out there have any of these parts they want to get rid of?

[rib33024]

Welcome to BGW



Is this the link you are talking about


http://www.buggiesgonewild.com/ezgo-...4-strokes.html

[Mike Walters]

Yup! that is the pic. Sorry about my hyperlink. Thanks for the assist.

I am missing everything in this picture except the throttle cable itself. I like the speed, but the peddal is so touchy, it is inconvenient. I think that with the linkage back to normal, I can adjust the governor (as the link you provided instructs) to get back enough speed to be acceptable.

[scottyb]

I have one of those ~ took it off of my 2000 workhorse.... email me about it.
cartsunlimited@hughes.net

[Mike Walters]

Thanks for looking ScottyB. I am sorry to hear you can't find it. Let me know if you do. "till then.... I am still on the hunt if anyone else has one or even just some of the parts