|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
03-16-2013, 07:14 AM | #11 |
Gone Wild
Join Date: Oct 2010
Location: Pittsburgh Pa
Posts: 1,551
|
Re: 1981 g1 lift
That is what you need. I'm not sure if you will need the bearings, upper/lower bushings and king pins. That's gonna run you somewhere around another $80. You should look for some used spindles... complete and ready to bolt on.
Last edited by Field6565; 03-16-2013 at 07:15 AM.. Reason: a |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-29-2013, 04:55 PM | #12 |
Not Yet Wild
Join Date: Mar 2013
Location: durham, ca
Posts: 9
|
Re: 1981 g1 lift
So I got everything I need and got the front of the lift on and drove it up and back to check the toe. Then put the back on. Went to drive it and nothing. The starter clicks like it does before the engine turns over but then does nothing. Any ideas?
|
03-29-2013, 07:04 PM | #13 |
Gone Wild
Join Date: Jul 2012
Location: Pigeon Forge TN
Posts: 209
|
Re: 1981 g1 lift
Check your battery voltage and your connections to the battery.
Bob T |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
1981 G1 Solenoid | Gas Yamaha | |||
Ran my 1981 G1 out of oil. Now What? | Gas Yamaha | |||
1981 G1A won't start | Gas Yamaha | |||
1981 Yamaha G1 - New Engine, 4" Lift | Golf Carts and Parts | |||
1981 Ez-go Help!!!! | Gas EZGO |