08-18-2013, 11:01 AM | #1 |
Not Yet Wild
Join Date: Mar 2012
Posts: 38
|
governor cover
hello, I have an 06 txt I was going to adjust governor but there is a shield over it is there a trick to remove this looks like there are two big rivets holding it in place
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-18-2013, 11:09 AM | #2 |
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,188
|
Re: governor cover
No trick. Just a drill and a 3/16 bit. If you can't get to it to drill use a pair of diagonal cutters and cut the bottom of the rivet off.
|
08-18-2013, 12:07 PM | #3 |
Not Yet Wild
Join Date: Mar 2012
Posts: 38
|
Re: governor cover
I guess ill have to get a right angle drill cant get to bottom of rivets either its a heavy metal plate with edges turned down
|
08-18-2013, 07:16 PM | #4 |
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,188
|
Re: governor cover
If you pull the motor access cover, can you get to it?
|
Tags |
tamper shield |
|
|
Similar Threads | ||||
Thread | Forum | |||
Governor | Gas EZGO | |||
94 governor | Gas Club Car | |||
88 ez go governor | Gas EZGO | |||
governor | Gas Club Car | |||
Dash cover will not cover | Gas EZGO |