|
|
|||||||
| Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
09-17-2015, 11:29 AM
|
#1 |
|
Not Yet Wild
Join Date: Sep 2015
Location: Pepperell mass
Posts: 7
|
Gear grease
What should I use for axel or gear grease I know it's never been checked in 5 years. Also where do I fill it on a g9
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
09-17-2015, 12:32 PM
|
#2 |
|
Gone Wild
 Join Date: Sep 2012
Location: Missouri
Posts: 2,755
|
Re: Gear grease
There should be a plug somewhere on it. Not sure where exactly it is on a G9. Probably a bolt style head that will be about half way up the case, maybe a little less than that. It will stick out away from the case a little bit, not tight against it like a regular bolt.
All this if they did it like most I've seen are. As for grease, I use 80/90w gear oil in both mine. |
|
|
|
|
09-18-2015, 03:59 PM
|
#3 |
|
Not Yet Wild
Join Date: Sep 2015
Location: Pepperell mass
Posts: 7
|
Re: Gear grease
Mine looks like this
|
|
|
|
|
09-18-2015, 05:48 PM
|
#4 |
|
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,874
|
Re: Gear grease
Drain bolt-at the bottom of the case. Fill hole-remove the rubber vent tube. Oil level bolt- the bolt on the driverside about 3" to 4" from the bottom of the case. If I was cool like some other guy's here, I could make a red circle and arrrow, but I'm not.
 |
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| 8:1 Gear Change - Ring Gear Torque Value? | Electric EZGO | |||
| ezgo marathon back gear box? question i describe in depth not sure if its gear box | Gas EZGO | |||
| Taylor-Dunn wheel gear assembly grease plug size? | Gas Harley Davidson | |||
| Grease? | Electric Club Car | |||
| What grease to use | Lifted Golf Carts | |||
Linear Mode
