|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
02-26-2016, 07:32 AM | #1 |
Gone Wild
Join Date: Oct 2010
Location: Fort Worth, TX
Posts: 215
|
1998 g16 secondary driven clutch noise
I hear some clicking noises. Just put in a factory spring. Looks like there has been some contact room the axle housing if you look closely. New drive clutch and motor and belt from vegascarts. See the picture. I'm thinking I need to take it all apart and see why there is contact. Maybe the last washer is gone. Can't tell if the bushing is gone. What do you think?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
02-26-2016, 07:59 AM | #2 |
maintaining a low profile
Join Date: Oct 2009
Location: SW Virginia USA
Posts: 6,316
|
Re: 1998 g16 secondary driven clutch noise
Did you install one of these in place of the OEM c clip?
|
02-26-2016, 08:02 AM | #3 |
Gone Wild
Join Date: Oct 2010
Location: Fort Worth, TX
Posts: 215
|
Re: 1998 g16 secondary driven clutch noise
I didn't get that far in to it. Only replaced the spring didn't take off the last sheave before the gear box. Just left it on the shaft. Could that be the issue?
|
02-26-2016, 08:23 AM | #4 |
VC 460 CLONE GONE WILD
Join Date: Oct 2014
Location: Ray BY The Bay NJ
Posts: 10,647
|
Re: 1998 g16 secondary driven clutch noise
Your ramp shoes don't look too good either.
|
02-26-2016, 08:28 AM | #5 |
Gone Wild
Join Date: Oct 2010
Location: Fort Worth, TX
Posts: 215
|
Re: 1998 g16 secondary driven clutch noise
Ray, my old spring popped out and put some scratches around. When I take everything apart I'll replace the ramp shoes as well.
Dave, I saw this from one of your other posts. I'm guessing that's what I need as well. Yamaha J38-46322-09-00 Spacer,Input Shaft; New # J55-46322-09-00 Made by Yamaha? |
02-26-2016, 08:29 AM | #6 |
maintaining a low profile
Join Date: Oct 2009
Location: SW Virginia USA
Posts: 6,316
|
Re: 1998 g16 secondary driven clutch noise
Yep, could be. If the original clip is gone--it fits into a groove on the input shaft behind the helix--then the helix can come into contact with the gear case. The spacer replaces the clip. Ignore the condition of the shaft in the pic
|
02-26-2016, 08:33 AM | #7 |
VC 460 CLONE GONE WILD
Join Date: Oct 2014
Location: Ray BY The Bay NJ
Posts: 10,647
|
Re: 1998 g16 secondary driven clutch noise
Dave also has a pic of the correct way to install the spacer which I viewed when installing mine,
|
02-26-2016, 08:33 AM | #8 |
Gone Wild
Join Date: Oct 2010
Location: Fort Worth, TX
Posts: 215
|
Re: 1998 g16 secondary driven clutch noise
Ok thanks Dave and Ray, I'll see what I find after talking it apart. Will get back shortly.
|
02-26-2016, 08:37 AM | #9 |
VC 460 CLONE GONE WILD
Join Date: Oct 2014
Location: Ray BY The Bay NJ
Posts: 10,647
|
Re: 1998 g16 secondary driven clutch noise
If you are running the VC clone I used the umaxx spring set on B 1. This has worked really well with my 24" tires.
|
02-26-2016, 08:41 AM | #10 |
Gone Wild
Join Date: Oct 2010
Location: Fort Worth, TX
Posts: 215
|
Re: 1998 g16 secondary driven clutch noise
I've heard to use the umax, they didn't have in stock but if I have to order in any parts for this I'll order one as well.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Anyone ever pulled a driven secondary clutch | Gas EZGO | |||
Secondary or Driven Clutch Issues | Gas Yamaha | |||
Where to buy new performance driven clutch (secondary)? | Big Block Talk! | |||
G9 secondary (driven) clutch? | Gas Yamaha | |||
ezgo secondary / driven clutch | Golf Carts and Parts |