|
|
|||||||
| Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
08-21-2012, 09:33 PM
|
#1 |
|
Not Yet Wild
Join Date: Aug 2012
Posts: 13
|
G9 goes slow
I recently got a 1992 Yamaha 36 volt G9 electric cart . has new batteries . goes slow in forward on even a slight incline, but, will go sufficiently faster on same incline in reverse. Any solutions or diagnostic procedures. Thanks
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
08-22-2012, 06:58 AM
|
#2 |
|
Gone Wild
 Join Date: Sep 2010
Location: Florida
Posts: 1,895
|
Re: G9 goes slow
yes...look on top of the FnR switch under your seat...this is the device that turns when you move the lever for forward and reverse in case your new to this. On top of that there is a microswitch with two or three wires going to it...this just activates your reverse buzzer..pull both or all three wires off the microswitch and leave them disconnected...try cart now...
 |
|
|
|
|
08-22-2012, 08:02 PM
|
#3 |
|
Not Yet Wild
Join Date: Aug 2012
Posts: 13
|
Re: G9 goes slow
camaroluvz28 THANK YOU ! It runs much faster and pulls on incline much better.the 250 ohms resistor is missing by the solenoid. I was told by the guy at the golf cart shop that i didn't need it. Do I ? He said just connect the wires together.I thought maybe that was my slow go problem . Thanks again .
|
|
|
|
|
08-23-2012, 08:41 AM
|
#4 |
|
Gone Wild
Join Date: Sep 2010
Location: Florida
Posts: 1,895
|
Re: G9 goes slow
Resistor is just a safety mech...you dont nec need it but its a plus to have. I'm glad to hear your back in action and no prob...
|
|
|
|
|
08-23-2012, 03:31 PM
|
#5 |
|
Not Yet Wild
Join Date: Aug 2012
Posts: 13
|
Re: G9 goes slow
Thanks Again !
|
|
|
|
|
10-22-2013, 04:30 PM
|
#6 |
|
Not Yet Wild
Join Date: Feb 2011
Posts: 10
|
Re: G9 goes slow
I have been fighting my G9 for months/years finally decided to figure it out and this fixed it...same issue as op
Thanks Cararoluvz!!! |
|
|
|
|
05-27-2014, 11:16 AM
|
#7 |
|
Not Yet Wild
Join Date: Jan 2014
Location: Florida
Posts: 8
|
Re: G9 goes slow
Will this work on a G2 as well? Do they have the same wiring? My cart runs faster in reverse
|
|
|
|
|
05-27-2014, 11:19 AM
|
#8 |
|
Not Yet Wild
Join Date: Feb 2011
Posts: 10
|
Re: G9 goes slow
only way to find out is look to see if you have the 2 or 3 wires going to a microswitch by the f&r selector.
For what its worth I unhooked mine and then hooked it back up and its just as fast forward as reverse. |
|
|
|
|
05-27-2014, 11:24 AM
|
#9 |
|
Not Yet Wild
Join Date: Jan 2014
Location: Florida
Posts: 8
|
Re: G9 goes slow
Thanks for the help. I will try it tonight.
|
|
|
|
|
05-27-2014, 11:25 AM
|
#10 |
|
Not Yet Wild
Join Date: Feb 2011
Posts: 10
|
Re: G9 goes slow
sounds like a plan.
good luck |
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| To slow | Sled Engine Swaps | |||
| 06 TXT not going slow | Gas EZGO | |||
| HELP.Slow to Start and Slow Acceleration | Gas EZGO | |||
| slow car | Electric Club Car | |||
| Slow! How do I make my club car Gasser go really slow. | Gas Club Car | |||
Linear Mode
