Resetting obc?

[canam80020]

What is the proper way to reset obc? batteries discharge over night, and new batteries. Battery light turns on only after a f ew blocks. after reading a few post, im guessing the obc needs reset or bad battery

[canam80020]

05 cc presedent

[Sergio]

Disconnect the negative cable from the battery pack and wait at least 10 minutes before reconnecting. There is no need to press the pedal or do anything else.

Make sure there is only one cable connected to the pack negative post and that the cable goes through the OBC.

If you just installed new batteries, make sure you connected the red wire coming from the charger socket to the pack positive post.

[cdressel]

I'd suggest looking up in the Sticky's (last one).
The procedure works well.
Chuck

[jakesnake27]

http://www.buggiesgonewild.com/elect...tting-obc.html

[Sergio]

That sticky really needs to be revised as it only applies to old model club cars.
If your reverse buzzer is not connected to the FNR switch, the stick just confuses folks as there is no buzzer that will ever sound.
Once you remove the power, the microprocessors in the controller and OBC are shut down so pressing anything has no effect as they are just signal inputs to the microprocessors.

I should have added the part about Turn Tow/Run switch to Tow before applying the power back on.

[canam80020]

Thank you, I will try it