|
Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
07-08-2020, 04:55 PM | #1 |
Not Yet Wild
Join Date: Jun 2020
Posts: 16
|
Solenoid Voltage
Should there be voltage at the big terminals on the solenoid valve when I switch the tow/run switch to run? It should be only continuity correct? I’m getting 49.7V at the large terminals and no voltage on the small terminals. I’m testing to see if my solenoid is bad. I don’t hear a click when I turn the on/off to on either. Is my solenoid bad? Thanks in advance.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-08-2020, 05:05 PM | #2 |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,868
|
Re: Solenoid Voltage
What model car do you have?
|
07-08-2020, 07:23 PM | #3 |
Not Yet Wild
Join Date: Jun 2020
Posts: 16
|
Re: Solenoid Voltage
G19
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Voltage on both sides of solenoid | Electric EZGO | |||
I put in new solenoid and voltage regulator now voltage goes up and down and burns up | Gas EZGO | |||
Solenoid Voltage | Electric EZGO | |||
Multi Voltage Solenoid | Extreme DC! | |||
solenoid voltage | Electric golf carts |