|
|
|||||||
| Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
07-11-2020, 08:42 PM
|
#1 |
|
Not Yet Wild
Join Date: Jun 2020
Posts: 16
|
G19 - Doesn’t Move
No solenoid click and reverse buzzer not beeping. I removed all the wires to the solenoid and alligator clipped small terminals to battery pack and got a click. Checked continuity on big terminals a got a beep. I assume my solenoid is good. Next, I checked the voltage going into the fuse line and I get 33.4V. Shouldn’t this read 48V since I have a 48V cart? Do I have a bad ground somewhere?
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
07-12-2020, 11:07 AM
|
#2 |
|
Not Yet Wild
Join Date: Jun 2020
Posts: 16
|
Re: G19 - Doesn’t Move
Went to check voltage this morning and I get 42.7V and it immediately drops to 27.7V. I’ve attached pictures if that helps. I’m struggling to find out why i get a voltage drop like that with nothing on. I checked the battery pack and it’s steady at 49.7V. The thing that confuses me that it’s the main line from the charging port connected to a fuse (removed) line to supply power (hot) to everything else. It shouldn’t drop like that with no fuse right?
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Carryall 2+ Doesn't want to move. | Gas Club Car | |||
| Another G29 that doesn't move!! | Electric Yamaha | |||
| ezgo doesn't move | Electric EZGO | |||
| Cranks over but doesn't move. | Gas Club Car | |||
| Doesn't move | Electric EZGO | |||
Linear Mode
