05-08-2008, 12:12 AM | #1 |
Not Yet Wild
Join Date: Apr 2008
Posts: 21
|
97 regen wont go
OK Im back with more questions about my CC.
I sent my controller in for repair at golframa and when it came back I installed it but now the contactor wont close when I turn on the key. seems like its not getting the gnd from the controlller to the solenoid (blue/white wire) obc solenoid lockout? jumped the gnd from B- on controller to sol and it closed but still no accelerator when pushed. F-R switch has 5 wires, assuming part of this is tow switch, can it be jumped out? Any help with this would be great. Thanks Rick |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-05-2008, 09:45 PM | #2 |
Not Yet Wild
Join Date: Apr 2008
Posts: 21
|
Re: 97 regen wont go
Come to find out when you remove the regen coil assembly you have to leave the small wires attached to the regen contactor to so the circuit is complete . that is why i wasnt getting the feed from the Z4 pin to the main contactor. Does that make sense? Cart runs good now.Thanks guys
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
ezgo wont go | Electric EZGO | |||
wont run with airbox | Gas Yamaha | |||
she wont go so EZ | Electric EZGO | |||
regen vs std | Electric Club Car | |||
lifted 97 regen | Electric Club Car |