|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
04-21-2013, 07:20 AM | #1 |
Not Yet Wild
Join Date: Mar 2013
Location: albertville,al
Posts: 4
|
g14 intake manifold
can a hairline crack be repaired on intake manifold
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-21-2013, 08:42 AM | #2 |
Not Yet Wild
Join Date: Mar 2013
Location: albertville,al
Posts: 4
|
Re: g14 intake manifold
new here and do enjoy reading forums and veiwing differnt answers to different quostions. so im not sure on how to ask one. i have a g14 yamaha with a cracked intake manifold and would like to know if it could be repaired with some kind of sealer,chemical compound or anything else. thanks any advise would appreciated
|
04-21-2013, 09:03 AM | #3 |
G8 Specialist
Join Date: Jun 2009
Location: Phoenix
Posts: 7,799
|
Re: g14 intake manifold
I would replace it. Venders here can get you what you need.
|
04-21-2013, 09:08 AM | #4 |
Not Yet Wild
Join Date: Mar 2013
Location: albertville,al
Posts: 4
|
Re: g14 intake manifold
thanks for the advise could you direct me to the place for the part
|
04-21-2013, 09:30 AM | #5 |
G8 Specialist
Join Date: Jun 2009
Location: Phoenix
Posts: 7,799
|
Re: g14 intake manifold
Call Cart Parts Plus. Or if you have a Yamaha dealer near you, they wwill have one.
Order new gaskets (2) one on each side of manifold. New are soft and dont need to tighteen as much to make it seal |
04-22-2013, 06:41 PM | #6 |
Vegas modded 420
Join Date: Jun 2009
Location: West MI
Posts: 15,443
|
Re: g14 intake manifold
If its the black phenolic or whatever it is, they crack easy you don't want to tighten them much, is common, is likely you could repair it with epoxy but would have to file/etc off the residue when it was dry so the surfaces are flat and seal properly. IIRC they don't cost that much I bought one for my G9 and found the original was fine and never put it in.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Clone Intake Manifold | Clone Engine Swaps | |||
WTB 2 barrel intake manifold Vanguard | Golf Carts and Parts | |||
robbins 2pg intake manifold | Golf Carts and Parts | |||
Bolt on manifold | Gas EZGO | |||
Briggs 20hp intake manifold | Big Block Talk! |