|
Gas Club Car Gas DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
08-01-2013, 09:36 AM | #1 |
Not Yet Wild
Join Date: Sep 2012
Location: NE Pennsylvania
Posts: 12
|
Club car ds front body installation?
Have a question about the front body installation on my 2002 club car ds.
I know this is probably easier than I am making it out to be but any help would be much appreciated. Took the front body off a while ago and going to put it back on. How does the body go into the slot and work with the 4 small screws (2 on each side) and the t-nut that slides in slot? The tnut slides in slot and screws go in from other side so body must go in between them, but there are no holes in body for screws to go through and go into tnut? And how does tnut stay up since it just slides down if not held in place by screw from other side? |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Need Front Body for Club Car DS | Golf Carts and Parts | |||
club car front plastic body | Golf Carts and Parts | |||
1990 Gas Club Car-Front body switch | Gas Club Car | |||
wtb club car front body | Gas Club Car | |||
club car front body | Golf Carts and Parts |