|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
05-26-2009, 04:57 PM | #1 |
Gone Wild
Join Date: Dec 2006
Location: Irving Texas
Posts: 249
|
differential input shaft
Allright guys,
I'm sure roady will call me and answer my question before too many people get to read it, but what are the options when a differential input shaft is as smooth as a babys bottom? As most of you are aware, my motor and diff have not gone through "normal" wear and tear, and it's decision making time. I have an extra rear end, but if it's something i can change just part of, keeping the spare diff in tact would be nice. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-26-2009, 05:51 PM | #2 |
nimda
Join Date: Jun 2007
Posts: 13,022
|
Re: differential input shaft
No, they took my phone.
|
05-26-2009, 05:52 PM | #3 |
nimda
Join Date: Jun 2007
Posts: 13,022
|
Re: differential input shaft
Let me check with some of the sponsors...maybe they can supply a shaft.
|
05-26-2009, 07:09 PM | #4 |
Gone Wild
Join Date: Dec 2006
Location: Irving Texas
Posts: 249
|
Re: differential input shaft
Took your phone?!?!?! What kind of SUMBITCH would do such a thing! When you head in to cut on the table, send me some smoke signals. Did you ever find your fuel sender?
:thumbu p: |
05-26-2009, 07:23 PM | #5 |
nimda
Join Date: Jun 2007
Posts: 13,022
|
Re: differential input shaft
The cheap basturds I USED to work for. (Dont tell em I said that. LOL!) What "fuel sender"..You mean Fuel pump?
|
05-26-2009, 07:36 PM | #6 |
Gone Wild
Join Date: Dec 2006
Location: Irving Texas
Posts: 249
|
Re: differential input shaft
:shock YES i mean fuel PUMP, my brain has been taken over by OnSite vocabulary. Getting back to the topic, is that thing press fit on, or can it be removed? I've got the rear end from hooptie i could swap out, but we did such a nice job rebuiling Gato's that I didn't want the effort to go to waste.
I think all of Gatos batts are still good, i pulled the motor, but since i no gotty no shop keys i didn'y get to harvest Whiteys motor or the controller. What did we do with the second controller? I know what everyone else reading this is thinking..."why aren't these guys PMing this inside conversation!" Well it's Roady's website, and i plain just don't give a rats! : ? |
05-26-2009, 07:46 PM | #7 |
nimda
Join Date: Jun 2007
Posts: 13,022
|
Re: differential input shaft
There is a snap ring that holds the input shaft and bearing in. Take the snap ring out and the shaft should come right out. Same goes for BOTH rear ends. You'll probly have to clean the goop out from around the shaft area to see the snap ring.
I am trying to find an exploded diagram but I haven't found one that shows the snap ring or lists the parts. Am I gonna have to come do it for ya NYLAN!!! I have the other controller! REMEMBER! Apparently NOT! |
05-26-2009, 09:10 PM | #8 |
Gone Wild
Join Date: Dec 2006
Location: Irving Texas
Posts: 249
|
Re: differential input shaft
YOU have the other one!!! Send that $$$$ my way whenever you get a chance.... wink:: shock:
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Input shaft | Electric EZGO | |||
Input Shaft question | Electric EZGO | |||
Transmission Input Shaft Replacement | Gas Yamaha | |||
Input shaft seal replacement on a 2005 350cc | Gas EZGO | |||
Spring on splined input shaft for transaxle | Electric Club Car |