rewire for new controler

lightintn · 06-17-2009, 04:24 AM

I am changing to a newer controler. the original had 4 blades on the box and the new has 3 blades. I was told to tie the A from the bottom of the f&r switch to the A2 from the motor. Does anyone know if this is correct?
This is a reman ez go controler. From alltrax I think.
thanks

Andy4639 · 06-17-2009, 08:37 AM

The 2 cables that where attached to the old controller with 4 lugs. Take those 2 cables and connect them together with a bolt. I perfer a new longer cable so I don't have to worry about the bolt shorting out at some point.

06-17-2009, 04:24 AM	#1
lightintn Not Yet Wild Join Date: Jun 2009 Location: tennessee and north carolina Posts: 8	rewire for new controler I am changing to a newer controler. the original had 4 blades on the box and the new has 3 blades. I was told to tie the A from the bottom of the f&r switch to the A2 from the motor. Does anyone know if this is correct? This is a reman ez go controler. From alltrax I think. thanks

06-17-2009, 08:37 AM	#2
Andy4639 48/400/Alltrax HS motor Join Date: Jan 2007 Location: Liberty SC, Garden City SC Posts: 6,190	Re: rewire for new controler The 2 cables that where attached to the old controller with 4 lugs. Take those 2 cables and connect them together with a bolt. I perfer a new longer cable so I don't have to worry about the bolt shorting out at some point.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
LF: bombardier nev controler	Golf Carts and Parts
controler ?	Electric EZGO
getting the right controler?	Electric Club Car
Circuit Priority On Rewire jobs	Electric Club Car
controler	Electric EZGO

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum