2003 EZGO TXT PDS questions

Hntn4Ya · 04-04-2010, 08:04 PM

The front tires seem to be leaning in to much. How do I adjust this on a Jakes lift? And second...Cart seems to be real bouncy while riding. Is this a shock isssue? What can I do to firm the ride up some. Cart has a slight lean to the drivers side too.

LostHusker · 04-04-2010, 09:27 PM

Cart looks good, you may need to tighten the bolt for the spindle area, sometimes I have found them not as tight as they could be which will allow for the spindle area to lean inwards. Also check the distance on the inside area of the tires from front to rear. This will insure your tie rod is spaced properly for the tires.

Hntn4Ya · 04-05-2010, 11:01 AM

Well, its definately leaned in noticeably. The inside 2/3's of the front tires are all than seem to be touching the ground on the front end. Maybe that the way its supposed to be..don't know...thats why I'm asking. Seems logical if I was running it at Bristol Motor Speedway, but not in my neighborhood.

Front passenger side tire rubs on something bad when I turn it left hard too. Where are the bolts you are talking about checking. I'm a mechanical moron...but know a little bout wiring...thats why I bought a sparky

LostHusker · 04-05-2010, 01:56 PM

There will be a single bolt by the spindle, tighten that one and see if makes a difference. Bolt should be about 7" long.

04-04-2010, 09:27 PM	#12
LostHusker Just one day at a time Join Date: Sep 2009 Location: South TX Posts: 8,650	Re: 2003 EZGO TXT PDS questions Cart looks good, you may need to tighten the bolt for the spindle area, sometimes I have found them not as tight as they could be which will allow for the spindle area to lean inwards. Also check the distance on the inside area of the tires from front to rear. This will insure your tie rod is spaced properly for the tires.

04-05-2010, 11:01 AM	#13
Hntn4Ya Not Yet Wild Join Date: Mar 2010 Posts: 28	Re: 2003 EZGO TXT PDS questions Well, its definately leaned in noticeably. The inside 2/3's of the front tires are all than seem to be touching the ground on the front end. Maybe that the way its supposed to be..don't know...thats why I'm asking. Seems logical if I was running it at Bristol Motor Speedway, but not in my neighborhood. Front passenger side tire rubs on something bad when I turn it left hard too. Where are the bolts you are talking about checking. I'm a mechanical moron...but know a little bout wiring...thats why I bought a sparky
Hntn4Ya Not Yet Wild Join Date: Mar 2010 Posts: 28

04-05-2010, 01:56 PM	#14
LostHusker Just one day at a time Join Date: Sep 2009 Location: South TX Posts: 8,650	Re: 2003 EZGO TXT PDS questions There will be a single bolt by the spindle, tighten that one and see if makes a difference. Bolt should be about 7" long.

Similar Threads
Thread	Forum
Just bought 2003 EZGO; Got Questions	Members Rides
2003 Club Car questions about upgrades	Electric Club Car
2003 ds iq nwie questions	Electric Club Car
2003 EZGO Speed Chip Questions	Electric EZGO

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum