|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
12-27-2021, 02:03 PM | #1 |
Not Yet Wild
Join Date: Jun 2021
Posts: 9
|
G16 Input shaft help
I have a 2000 g16 that keep wearing out the secondary sheeve (the one that you grease) which leads to grinding and rattling/excessive slowing of the cart. I thought the noise was coming from the input shaft bearing so i replaced all bearings in transaxle. After destroying two more sheeves im guessing the input shaft is just wore out and doesnt fit on the sheeve like it should allowing it to wobble and wear out? Does or can anyone get the OD measurements of a decent shape input shaft? I would hate to spend $300 and this not me the issue but i dont see what else it can be.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-04-2022, 05:36 PM | #2 |
Not Yet Wild
Join Date: Sep 2016
Location: Knoxville, TN
Posts: 9
|
Re: G16 Input shaft help
Did you figure this out?
Sent from my iPhone using Tapatalk |
|
|
Similar Threads | ||||
Thread | Forum | |||
Input Shaft Part Help! JR6-G6320-01-00 SHAFT, INPUT ASSY | Gas Yamaha | |||
EZGO Rear differential input shaft nut crimped? how to remove input shaft?! | Gas EZGO | |||
Input shaft | Electric EZGO | |||
need input shaft for G2 | Golf Carts and Parts |