|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
03-26-2017, 10:04 AM | #11 | |
Gone Wild
Join Date: Jul 2016
Location: Ma
Posts: 425
|
Re: xct controller install ??
Quote:
Thank you. Now I have to go remove it. I never saw that while installing the controller. |
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-26-2017, 10:35 AM | #12 |
Gone Wild
Join Date: Jan 2011
Location: mascoutah,il
Posts: 387
|
Re: xct controller install ??
2016CTD--Tell me how you rerouted the main harness. I can not get things to fit
|
03-26-2017, 10:48 AM | #13 | |
Gone Wild
Join Date: Jul 2016
Location: Ma
Posts: 425
|
Re: xct controller install ??
Quote:
Step #18 Is what I did and it worked fine, with pulling the slack from the harness, there are a couple of zip ties between the batteries that I cut and re attached after pulling the slack. http://www.alltraxinc.com/files/Doc1...utorial-P2.pdf |
|
03-28-2017, 07:17 PM | #14 |
Gone Wild
Join Date: Jan 2011
Location: mascoutah,il
Posts: 387
|
Re: xct controller install ??
I must be dumb but I can not get this controller hooked up in this cart. I have tried rerouting the main harness,No Luck. I tried to rotate the controller 180 and then other wires are to short. Any advise would be very helpful. NOT EVEN MY CART
|
03-28-2017, 07:25 PM | #15 |
Gone Wild
Join Date: Jul 2016
Location: Ma
Posts: 425
|
Re: xct controller install ??
Have you cut the zip ties between the batteries? Mine worked out fine. Its the only one I have done maybe someone else can shed some light on other tricks.
|
03-28-2017, 07:34 PM | #16 |
Gone Wild
Join Date: Jan 2011
Location: mascoutah,il
Posts: 387
|
Re: xct controller install ??
[ATTACH]http://www.buggiesgonewild.com/attachment.php?attachmentid=149529&stc=1&d=1490747 614149528[/ATTACH]
|
03-28-2017, 07:47 PM | #17 |
Gone Wild
Join Date: Jul 2016
Location: Ma
Posts: 425
|
Re: xct controller install ??
I had to have the aluminum mounting plate sitting in the position as if you were going to close it in order to get the wire slack needed. If you look at my picture it is in position just leaning back.
|
03-28-2017, 07:50 PM | #18 |
Gone Wild
Join Date: Jul 2016
Location: Ma
Posts: 425
|
Re: xct controller install ??
The other thing I noticed is you probably won't get the rear cover to fit the solenoid sticks out to far, check to make sure that the solenoid wont hit anything.
|
03-28-2017, 08:08 PM | #19 |
Gone Wild
Join Date: Jan 2011
Location: mascoutah,il
Posts: 387
|
Re: xct controller install ??
when sliding the controller cover in place the guide on the right bottom gets bound up on the wiring harness that is also routed through that spot?
|
03-28-2017, 08:14 PM | #20 |
Gone Wild
Join Date: Jul 2016
Location: Ma
Posts: 425
|
Re: xct controller install ??
I didn't have any binding on the wire harness, I moved the wire harness to where the instructions showed.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Where did you install your controller? | Electric Club Car | |||
Install 400-500 controller? | Electric Club Car | |||
05 txt pds controller install | Electric EZGO | |||
Controller Install | Electric EZGO | |||
new controller install ?????????? | Electric EZGO |