|
|
|||||||
| Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
04-22-2019, 05:02 PM
|
#1 |
|
Getting Wild
Join Date: Jan 2012
Posts: 147
|
Alltrax xct "failed to set settings to controller" error
Put the new feild map and tried to update and I'm getting this error. Any ideas?
Sent from my moto z3 using Tapatalk |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
04-22-2019, 05:04 PM
|
#2 |
|
Getting Wild
Join Date: Jan 2012
Posts: 147
|
Re: Alltrax xct "failed to set settings to controller" error
Also getting failed to load settings when I try to load the field map
Sent from my moto z3 using Tapatalk |
|
|
|
|
04-22-2019, 10:17 PM
|
#3 |
|
Gone Wild
 Join Date: Jun 2017
Location: Savannah, GA
Posts: 6,539
|
Re: Alltrax xct "failed to set settings to controller" error
Restart your computer and try a different USB cable? I’ve seen that error occasionally but not repeatedly.
|
|
|
|
|
04-23-2019, 06:44 AM
|
#4 |
|
Getting Wild
Join Date: Jan 2012
Posts: 147
|
Re: Alltrax xct "failed to set settings to controller" error
I'll give that a shot when I get home from work. It is a brand new cable. @scottyb any ideas?
Sent from my moto z3 using Tapatalk |
|
|
|
|
04-23-2019, 09:59 AM
|
#5 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: Alltrax xct "failed to set settings to controller" error
I've not had that problem recently. I program hundreds of Alltrax controls annually. Restart is always the best place to start. If the problem persists delete and re-install the software program.
|
|
|
|
|
04-23-2019, 10:51 AM
|
#6 |
|
Gone Wild
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 9,329
|
Re: Alltrax xct "failed to set settings to controller" error
Make sure You did not try to open the field map ".txt" file in notepad or some other editor (and hit save) before loading it into the Software.
|
|
|
|
|
04-23-2019, 11:49 AM
|
#7 | |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: Alltrax xct "failed to set settings to controller" error
Quote:
|
|
|
|
|
|
04-23-2019, 12:26 PM
|
#8 |
|
Getting Wild
Join Date: Jan 2012
Posts: 147
|
Re: Alltrax xct "failed to set settings to controller" error
ES-24-14 D&D Motor I have the map altrax sent me in an e-mail so I should be good but feel free to send a fresh one if you have it.
. I am deleting the software now and reinstalling so I can try that when I get home. |
|
|
|
|
04-23-2019, 12:59 PM
|
#9 | |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: Alltrax xct "failed to set settings to controller" error
Quote:
I have a 48v version. See attached |
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Can't see "speed sensor" reading on Alltrax controller | Electric EZGO | |||
| Alltrax SR48500 controller "Global Shutdown" | Electric Club Car | |||
| SPM Controller "Pre Charge" error | Electric EZGO | |||
| Alltrax SPM "low throttle" error code | Electric EZGO | |||
Linear Mode
