Testing solenoid on 96 Ds

Kirylaufer · 12-20-2019, 12:34 PM

If the solenoid jumper goes is in place and nothing improves, can it still be the problem. Can you jump by just adding two wire ends to big terminal. Do you leave it in exact on post position or take ay wires off?
Thanks to all

Kirylaufer · 12-20-2019, 01:58 PM

Ok. Hanging my head in shame, nevermind and support schools
Thanks

scottyb · 12-20-2019, 02:29 PM

Quote:

Originally Posted by Kirylaufer

Ok. Hanging my head in shame, nevermind and support schools
Thanks

lol for quick bypass test simply place both big cables on 1 post. If a small wire is on a big post include that small wire with the 2 big ones on 1 post. This eliminates the solenoid form the system. But a positive result ( cart runs) is not a definitive evaluation of the solenoid... failure to activate may be caused by the small activation wires not energizing - GL

Kirylaufer · 12-20-2019, 05:36 PM

Thank you very much for your time on this. If I get a full voltage reading off m- that goes to 0 on being floored, can I safely assume any problems would be past the controller.
Many thanks

Kirylaufer · 01-02-2020, 11:33 PM

Closed

12-20-2019, 12:34 PM	#1
Kirylaufer Gone Wild Join Date: Dec 2019 Location: Inside house, bedroom too Posts: 209	Testing solenoid on 96 Ds If the solenoid jumper goes is in place and nothing improves, can it still be the problem. Can you jump by just adding two wire ends to big terminal. Do you leave it in exact on post position or take ay wires off? Thanks to all

12-20-2019, 01:58 PM	#2
Kirylaufer Gone Wild Join Date: Dec 2019 Location: Inside house, bedroom too Posts: 209	Re: Testing solenoid on 96 Ds Ok. Hanging my head in shame, nevermind and support schools Thanks

12-20-2019, 05:36 PM	#4
Kirylaufer Gone Wild Join Date: Dec 2019 Location: Inside house, bedroom too Posts: 209	Re: Testing solenoid on 96 Ds Thank you very much for your time on this. If I get a full voltage reading off m- that goes to 0 on being floored, can I safely assume any problems would be past the controller. Many thanks

01-02-2020, 11:33 PM	#5
Kirylaufer Gone Wild Join Date: Dec 2019 Location: Inside house, bedroom too Posts: 209	Re: Testing solenoid on 96 Ds Closed

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

Similar Threads
Thread	Forum
G29 solenoid testing.	Electric Yamaha
Solenoid testing	Gas Club Car
Solenoid Testing	Electric Club Car
Solenoid Testing	Electric Yamaha
Solenoid Testing	Electric EZGO