|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
02-03-2021, 05:27 PM | #11 |
Gone Wild
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 9,329
|
Re: Curtis 1515-5201 parameters
The S3 is speed code 3 and it will not change.
I am still not sure you followed the proper procedure based on your answer. After you successfully enter all three codes in the IQDM (leave the IQDM plugged) and put the Tow/Run on TOW for 30 seconds, does the IQDM screen changes/show "Speed Setting 4" when you flip to Run again? If it does you are done, do not select speed code 3 again. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
02-03-2021, 09:06 PM | #12 |
Not Yet Wild
Join Date: Oct 2007
Location: N C
Posts: 21
|
Re: Curtis 1515-5201 parameters
Thanks for the response. FYI, I’m using a Club Car Curtis 1313 hand held programmer with OEM access. I put the 3 codes I got from CC into A,B, and C. Then I switched the Run/Tow switch to tow and waited 30 seconds plus. When I switched the switch back to Run, the programmer came back up, it had changed the box in the parameters, Speed Level to 4. About 4 or 5 settings down is the S3 Fwd speed is still at 14.8 mph. And the cart still won’t run over 13-14. Thanks for taking time to work with me on this. If this is something that might be better talking about, feel free to give me a call. Ken 336-260-4725.
|
02-04-2021, 07:00 AM | #13 |
Gone Wild
Join Date: Sep 2016
Location: Titusville, FL...Space Coast
Posts: 591
|
Re: Curtis 1515-5201 parameters
Plug in your programmer...Go to the monitor menu and make sure that your throttle (mcor) is reaching 100 percent...What is the condition of the batteries....
|
05-06-2021, 08:05 PM | #14 |
Not Yet Wild
Join Date: Sep 2016
Posts: 34
|
Re: Curtis 1515-5201 parameters
my cart is doing the same thing except the it shows above range even though it is set to speed code 4? and i cannot change the speed above 14.8. it want me to correct the speed code to 3??
S/N of cart is PH1344-414424 Controller is 1515-5201 programmer is 1313-4331 i have done a cart before and it all worked fine? any help would be greatly appreciated. Thanks |
02-05-2022, 02:35 PM | #15 |
Not Yet Wild
Join Date: Feb 2022
Posts: 2
|
Re: Curtis 1515-5201 parameters
Hello!
Did any one ever solve this issue? I am having the same problem. Pictures of the programmer attached. Speed Setting states 4, but the 5th down shows S3 Fwd Speed instead of S4. |
|
|
Similar Threads | ||||
Thread | Forum | |||
Difference between Curtis Controller 1510-5201 and 1515-5201 | Electric Club Car | |||
Curtis 1515 5201 and solenoid | Golf Carts and Parts | |||
Curtis Controller 1515-5201 | Golf Carts and Parts | |||
curtis controller 1515-5201 | Golf Carts and Parts | |||
curtis 1515-5201 for sale | Golf Carts and Parts |