|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
02-03-2021, 07:13 PM | #1 |
Not Yet Wild
Join Date: Aug 2019
Posts: 63
|
2004 Club Car Precedent no go after harness replacement
I replaced the wiring harness and batteries on a 2004 club car precedent today. Finished up, turned tow/run to run and then key to on position. Nothing. Is there a procedure I need to go through in order to get everything working again? I do not see anything that has been connected incorrectly or differently.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
02-03-2021, 08:08 PM | #2 |
Gone Wild
Join Date: Sep 2010
Posts: 879
|
Re: 2004 Club Car Precedent no go after harness replacement
check all the fuses , might have popped one.... then start checking for voltage in all the right places
|
02-03-2021, 08:22 PM | #3 |
Not Yet Wild
Join Date: Aug 2019
Posts: 63
|
Re: 2004 Club Car Precedent no go after harness replacement
|
02-04-2021, 08:47 AM | #4 |
Not Yet Wild
Join Date: Aug 2019
Posts: 63
|
Re: 2004 Club Car Precedent no go after harness replacement
Fixed
One of the blue wires going to the solenoid had come off at some point. Probably when I was putting the protective cover back on. Everything is a go on the harness. |
|
|
Similar Threads | ||||
Thread | Forum | |||
2004 Precedent Factory harness | Electric Club Car | |||
2006 Club Car Precedent Wiring Harness | Gas Club Car | |||
Club Car Precedent Light Wiring Harness | Electric Club Car | |||
Main wire harness for 2004 Precedent | Electric Club Car | |||
Club Car Precedent 08+ Wiring Harness 8V Battery Connection | Electric Club Car |