|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
05-08-2021, 06:39 AM | #1 |
Not Yet Wild
Join Date: Feb 2021
Posts: 6
|
Molding problems
Hi everyone! I have been working on my 87 marathon since November trying to bring it back to life. I am making great progress but I am having issues finding all the trim moldings. I found a thread where someone was talking about Jeep CJ fender flares would fit with a little modification. But they didnt state what year CJ so having problems finding them.. I have done too much work to just slap something on there. I also cannot find anything that will work for the front dash side edge. Any suggestions would be greatly appreciated and I appreciate your time for reading this. I added a few pics. One shows original when I got it, one where I'm at now and the other is how bad it was rusted out. Thanks again
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
WTS Marathon molding trim. | Golf Carts and Parts | |||
WTB Marathon Molding | Golf Carts and Parts | |||
Rubber Molding | Electric EZGO | |||
Rubber molding | Gas EZGO | |||
body molding | Golf Carts and Parts |