|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
06-29-2021, 06:23 PM | #1 |
Not Yet Wild
Join Date: Aug 2012
Posts: 9
|
Curtis 1205M-5606
Installed new right out of the box 1205M-5606 Controller, ITS throttle type into a EZGO TXT Series.
Two issues: 1- (Solenoid clicks)no throttle response until about 1/3 of the way pressed from the top. 2- cart cuts in/out for half a second consistently at the last 1/3 to full pedal. Could this be a programming issue? |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-14-2021, 10:42 AM | #2 |
Not Yet Wild
Join Date: Aug 2012
Posts: 9
|
Re: Curtis 1205M-5606
Well my first issue is still the same as I completely replaced the pedal box, internals and harness. Guess it’s what it is!! Second issue solved it by switching cables around. Initially the A1 cable from motor was going to M- and B+ on Controller was connected to FnR switch at contact A. I swapped around those cables between each other. So A1 goes to B+ on controller and M- goes to contact A on FnR switch(contact board).
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Alltrax AXE vs New CURTIS 1205M on TXT 36V | Electric EZGO | |||
1205m-5606 | Electric EZGO | |||
Curtis 1204 To 1205M Wiring | Electric Club Car | |||
Troubleshooting Curtis 1205M controller | Electric EZGO | |||
Curtis 1205M on a 98 model ezgo | Extreme DC! |