|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
09-05-2021, 07:40 AM | #1 |
Not Yet Wild
Join Date: Sep 2021
Posts: 6
|
1996 Medalist with alltrax DCX controller won't go
Just got new batteries. Solenoid won't click, have 38.5 volts on both sides of solenoid, here's numbers from pins on controller
White .6 v.**** Black 0 Green black 0 Orange flashes .1 Light green flashes .1 Yellow 38.5 Blue* 38.5 Red 38.5 Redyellow 38.5 Sent from my SM-G975U using Tapatalk |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-05-2021, 07:42 AM | #2 |
Not Yet Wild
Join Date: Sep 2021
Posts: 6
|
Re: 1996 Medalist with alltrax DCX controller won't go
Also, has the rocker style fwd/rev switch with diode in dash
Sent from my SM-G975U using Tapatalk |
09-05-2021, 08:26 AM | #3 |
Not Yet Wild
Join Date: Sep 2021
Posts: 6
|
Re: 1996 Medalist with alltrax DCX controller won't go
And no light on contoller
Sent from my SM-G975U using Tapatalk |
09-05-2021, 12:12 PM | #4 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: 1996 Medalist with alltrax DCX controller won't go
Looks like you have battery pack voltage on Pins, 6, 9 and 10, so the DCX ought to power up (Led flashes green four times, then steady green)
Pin-5 should go to pack voltage when pedal is pushed and Pin-4 should have pack voltage when F/R is in R. |
09-05-2021, 12:29 PM | #5 |
Not Yet Wild
Join Date: Sep 2021
Posts: 6
|
Re: 1996 Medalist with alltrax DCX controller won't go
No power, no light, nothing, I just read about a reset, ever done this?
Sent from my SM-G975U using Tapatalk |
09-05-2021, 12:43 PM | #6 |
Not Yet Wild
Join Date: Sep 2021
Posts: 6
|
Re: 1996 Medalist with alltrax DCX controller won't go
Could it be the ITS/footswitch
Sent from my SM-G975U using Tapatalk |
09-05-2021, 01:00 PM | #7 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: 1996 Medalist with alltrax DCX controller won't go
Resetting is completely shutting down DCX and then returning it to the stand-by condition. It is accomplished by flipping the Run/Tow switch to tow and after a minute or so beck to Run.
Unless the DCX powers up (LED steady green after four green flashes), even thinking about the ITS or footswitch is a waste of time. Connect your voltmeter's black lead to the B- terminal on the DCX and measure the voltage on Pins 6, 9 and 10. If they all three have battery pack voltage and the LED does not come on, the controller is bad. |
09-05-2021, 02:14 PM | #8 |
Not Yet Wild
Join Date: Sep 2021
Posts: 6
|
Re: 1996 Medalist with alltrax DCX controller won't go
That's what Iwas afraid of...
Sent from my SM-G975U using Tapatalk |
|
|
Similar Threads | ||||
Thread | Forum | |||
1996 Ezgo DCS for sale with alltrax controller | Electric EZGO | |||
1996 medalist 36 volt | Electric EZGO | |||
95 medalist with new alltrax controller problem | Electric EZGO | |||
1996 ezgo medalist tie rod help | Lifted Golf Carts | |||
1996 E-Z GO Medalist help | Electric EZGO |