|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
12-25-2009, 12:10 PM | #1 |
Not Yet Wild
Join Date: Dec 2009
Location: upstate ny
Posts: 4
|
slammed g9
here is a couple pics of my g9 currently under construction
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
12-25-2009, 04:48 PM | #2 |
Gone Wild
Join Date: Jul 2009
Location: Gonzales, Texas
Posts: 585
|
Re: slammed g9
|
12-25-2009, 06:25 PM | #3 |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,052
|
Re: slammed g9
Welcome to BGW
What other plans do you have? |
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
12-26-2009, 04:03 PM | #4 |
gone yamaha!
Join Date: Sep 2008
Location: ontario, canada
Posts: 1,424
|
Re: slammed g9
looks neat!
|
12-27-2009, 01:35 AM | #5 |
Gone Wild
Join Date: Nov 2009
Location: Boondocks, MS
Posts: 693
|
Re: slammed g9
um...wow...need to build ya some a-arms
|
12-29-2009, 09:29 AM | #6 |
Gone Crazy
Join Date: Jan 2007
Location: Chesterfield, Va
Posts: 6,021
|
Re: slammed g9
Might consider puting the lower plate on a pivot so you don't rip the bag apart.
If not at least get the plates even when at ride hieght. Whats next on the list? |
01-11-2010, 11:35 AM | #7 |
Not Yet Wild
Join Date: Dec 2009
Location: upstate ny
Posts: 4
|
Re: slammed g9
the upper and lower plates have to be even when laid out, they are not going to tear. i have these bags on my i-beam mazda with no problems. as far as whats next got to get the rear done this week hopefully, and then start fitting the body
|
01-29-2010, 10:46 AM | #8 |
Not Yet Wild
Join Date: Dec 2009
Location: upstate ny
Posts: 4
|
Re: slammed g9
a couple parts back from the powder coater
|
01-29-2010, 04:45 PM | #9 |
Gone Wild
Join Date: Jul 2008
Location: Reddick IL
Posts: 11,220
|
Re: slammed g9
Ny, Santa will steal the red and green ride.
Did you form the tubing or use pre bent parts? That is some big tubing. |