engine access panel

a70eliminator · 01-20-2011, 06:15 AM

Hi, I've been searching e-bay for a couple weeks trying to find a plain ol access cover for my cc, there are literaly 100's of custom alluminum, stainless, polished, ect ect, but not one single factory original, what do people do just throw them away in favor of a custom? Maybe this isn't the proper place to WTB? I sure haven't had any luck finding one.

rose88 · 01-20-2011, 10:12 AM

I have a couple of used ones. I replaced mine with a new factory one because it was a new build. Also if you have a used one, clean it real good and try the Krylon Fusion paint, works pretty good.

Just food for thought!

Jimmie · 01-20-2011, 11:48 AM

I don't know your year but here is a 93 thru 02 DS. http://www.everythingcarts.com/p-161...ess-panel.aspx

a70eliminator · 01-20-2011, 05:21 PM

Thats the one jimmie, don't know what makes it different then pre 92 but it sure looks the same Logo and all.
My cover sustained damage from a fire that erupted below it, a serious melt down. Thanks for the link.

a70eliminator · 01-20-2011, 08:00 PM

Ok check this out, I got crafty and cut out the worst of the fire damage and patched it with some stainless louver sheared from the side of junked drinking fountain, gave it a quick spray bomb black. No budget have to just keep fixin what I got,

Jimmie · 01-20-2011, 08:36 PM

That looks great to me, the louvers will give a way for the flames to vent the next time.

01-20-2011, 06:15 AM	#1
a70eliminator Getting Wild Join Date: Nov 2010 Location: Northeast Ohio Posts: 115	engine access panel Hi, I've been searching e-bay for a couple weeks trying to find a plain ol access cover for my cc, there are literaly 100's of custom alluminum, stainless, polished, ect ect, but not one single factory original, what do people do just throw them away in favor of a custom? Maybe this isn't the proper place to WTB? I sure haven't had any luck finding one.

01-20-2011, 10:12 AM	#2
rose88 Gone Wild Join Date: Apr 2010 Location: West Tennessee Posts: 1,269	Re: engine access panel I have a couple of used ones. I replaced mine with a new factory one because it was a new build. Also if you have a used one, clean it real good and try the Krylon Fusion paint, works pretty good. Just food for thought!

01-20-2011, 11:48 AM	#3
Jimmie Gone Wild Join Date: Oct 2009 Location: Lee County, Georgia Posts: 521	Re: engine access panel I don't know your year but here is a 93 thru 02 DS. http://www.everythingcarts.com/p-161...ess-panel.aspx

01-20-2011, 05:21 PM	#4
a70eliminator Getting Wild Join Date: Nov 2010 Location: Northeast Ohio Posts: 115	Re: engine access panel Thats the one jimmie, don't know what makes it different then pre 92 but it sure looks the same Logo and all. My cover sustained damage from a fire that erupted below it, a serious melt down. Thanks for the link.

01-20-2011, 08:36 PM	#6
Jimmie Gone Wild Join Date: Oct 2009 Location: Lee County, Georgia Posts: 521	Re: engine access panel That looks great to me, the louvers will give a way for the flames to vent the next time.

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
Fairplay Information Access	Star and Fairplay
Access Panel -Marathon	Golf Carts and Parts
How do I access switch panel?	Electric EZGO
How do I access switch panel?	Electric EZGO